[Mon Jul  2 19:05:43 2012] Detection parameters:
  Position = (370.9, 347.0) = 20 12 35.94 -56 50 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.4 +/- 34.9
  Background counts = 450.2
  Rate = 0.03 +/- 0.003

[Mon Jul  2 19:05:44 2012] Off-axis axis estimate = 6.32'
[Mon Jul  2 19:08:01 2012] Using EEF radius (= 9.59 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 19:08:01 2012] Initial guess for spatial extent in simple fitting = 9.59"
[Mon Jul  2 19:08:01 2012] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.231
[Mon Jul  2 19:08:01 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.59"
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src15.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src15.csv
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src15.csv
[Mon Jul  2 21:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jul  2 21:33:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon Jul  2 21:33:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:01 2012] Source 16 is offset by 3.522897 and -0.374503 pixels which is larger than
2 X fitted extent = 1.042156 x 1.042156, not incorporating fit results
[Tue Jul  3 00:08:01 2012] Spatial fit model total counts = 5719.710000, observed total counts = 5697.000000
[Tue Jul  3 00:08:01 2012] Offset between fit and detection position for source 16 = 3.713938 pixels
[Tue Jul  3 00:08:01 2012] Warning, changing simple spatial fit ID from 15 to 13
[Tue Jul  3 00:08:01 2012] 5508.539000 total counts/ 5201.410000 bgd. counts: snr = 4.258536
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 3.713938 pixels
  Position = (372.6, 350.2) = 20 12 35.03 -56 50 6.0
  Extent = 17.0 (13.6-18.7)", rotation angle = 0
  Source counts = 307.1 +/- 74.2
  Background counts = 5201.4
  Rate = 0.02 +/- 0.006
[Tue Jul  3 00:08:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 00:08:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 00:08:01 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 00:08:01 2012] Source does appear to be extended
[Tue Jul  3 00:08:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 00:08:01 2012] Source is confused with source 6
[Tue Jul  3 00:08:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 00:08:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul  3 00:08:20 2012] Initial guess for spatial extent in simple fitting = 16.99"
[Tue Jul  3 00:08:20 2012] source mask rpix=3.9, npix_max = 77, mask sum = 77, frac = 0.991
[Tue Jul  3 00:08:20 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 16.99"
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src13.csv
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src13.csv
[Tue Jul  3 02:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jul  3 02:22:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jul  3 02:22:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src13.csv
[Tue Jul  3 02:22:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:09:57 2012] Spatial fit model total counts = 11677.300000, observed total counts = 9839.000000
[Tue Jul  3 04:09:57 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 04:09:57 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:09:57 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 04:09:57 2012] Source does appear to be extended
[Tue Jul  3 04:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:10:13 2012] XMMSAS src. selection expression = ellipse(32367.458000, 30422.850000, 1019.544029, 1019.544029, 0.000000, X, Y)
[Tue Jul  3 04:10:13 2012] Writing source region out to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src16_src.reg
[Tue Jul  3 04:10:13 2012] Extracting stamp from image fullrun_pn_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (314, 292) - (431, 409)
[Tue Jul  3 04:10:13 2012] XMMSAS bgd. selection expression = annulus(32367.458000, 30422.850000, 1699.240049, 3398.480098, X, Y) && !ellipse(31481.122528, 28008.800873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33942.167419, 30676.454834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.016479, 30294.396118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32912.778046, 30760.327209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32025.584076, 31115.179840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31373.840759, 30659.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.487122, 30636.900208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31640.429596, 29961.195251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33572.053680, 29880.843445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33009.344116, 29681.947235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.638000, 29870.018000, 1000.728029, 1000.728029, 0.000000, X, Y) && !ellipse(33701.109344, 29357.099091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.000732, 29344.917816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28282.157379, 29135.866119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33131.520599, 29022.496368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31168.691600, 29285.742000, 1441.040041, 1441.040041, 0.000000, X, Y) && !ellipse(29786.643005, 28577.901093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28180.546753, 28477.400269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32732.769714, 28586.665344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31036.195374, 28669.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.547668, 28233.193329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28825.381683, 28485.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.379425, 28069.847961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.645508, 27759.849396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29145.525116, 27942.061401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29749.000000, 27160.457947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28582.141174, 26986.120758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30770.557037, 27289.792389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29335.357056, 26402.741791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28812.810120, 26230.621552, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 04:10:13 2012] Writing fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src16.gif
[Tue Jul  3 04:15:47 2012] Mean detx,y = (2477.78, -5459.76) 
[Tue Jul  3 04:15:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 04:16:04 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 04:16:04 2012] Setting source spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul  3 04:16:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jul  3 07:16:17 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:16:17 2012] Error reading totcts from fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jul  3 07:16:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:16:17 2012] Using photon index=1.80, rate=0.0237, arf fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src16.arf
[Tue Jul  3 07:16:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:16:17 2012] Updating source flux to 7.9e-14
[Tue Jul  3 07:18:02 2012] Flag b found in src. 16 procflags, skipping spectral fitting
[Tue Jul  3 07:18:02 2012] Flag p found in src. 16 procflags, skipping spectral fitting
[Tue Jul  3 07:18:02 2012] Flag c found in src. 16 procflags, skipping spectral fitting