[Mon Jul  2 19:05:43 2012] Detection parameters:
  Position = (364.2, 344.9) = 20 12 39.45 -56 50 29.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 232.5 +/- 34.0
  Background counts = 439.6
  Rate = 0.02 +/- 0.003

[Mon Jul  2 19:05:44 2012] Off-axis axis estimate = 5.84'
[Mon Jul  2 19:08:01 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 19:08:01 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Mon Jul  2 19:08:01 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.069
[Mon Jul  2 19:08:01 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.35"
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src13.csv
[Mon Jul  2 21:33:53 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jul  2 21:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src13.csv
[Mon Jul  2 21:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jul  2 21:33:54 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jul  2 21:33:54 2012] Fit fullrun_pn_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Jul  3 00:08:01 2012] Warning, spatial fit 13 centroid is now closest to src. 16
[Tue Jul  3 00:08:01 2012] Source 14 is offset by -5.051499 and 3.646957 pixels which is larger than
2 X fitted extent = 1.036510 x 1.036510, not incorporating fit results
[Tue Jul  3 00:08:01 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 00:08:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 00:08:01 2012] Assessing source extent using major
[Tue Jul  3 00:08:01 2012] Source does appear to be extended
[Tue Jul  3 00:08:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 00:08:01 2012] Source is confused with source 16
[Tue Jul  3 00:08:20 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 00:08:20 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Tue Jul  3 00:08:20 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.069
[Tue Jul  3 00:08:20 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.35"
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src11.csv
[Tue Jul  3 02:22:14 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jul  3 02:22:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src11.csv
[Tue Jul  3 02:22:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jul  3 02:22:15 2012] fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jul  3 02:22:15 2012] Fit fullrun_pn_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Jul  3 04:09:57 2012] Warning, spatial fit 11 centroid is now closest to src. 19
[Tue Jul  3 04:09:57 2012] Source 14 is offset by -4.042763 and 6.222359 pixels which is larger than
2 X fitted extent = 1.089582 x 1.089582, not incorporating fit results
[Tue Jul  3 04:09:57 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:09:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:09:57 2012] Assessing source extent using major
[Tue Jul  3 04:09:57 2012] Source does appear to be extended
[Tue Jul  3 04:09:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 04:10:12 2012] XMMSAS src. selection expression = ellipse(31640.429596, 29961.195251, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul  3 04:10:12 2012] Writing source region out to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src14_src.reg
[Tue Jul  3 04:10:12 2012] Extracting stamp from image fullrun_pn_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (327, 307) - (402, 382)
[Tue Jul  3 04:10:12 2012] XMMSAS bgd. selection expression = annulus(31640.429596, 29961.195251, 1087.500000, 2175.000000, X, Y) && !ellipse(31481.122528, 28008.800873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33942.167419, 30676.454834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33238.016479, 30294.396118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32912.778046, 30760.327209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32025.584076, 31115.179840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31373.840759, 30659.167938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.487122, 30636.900208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33572.053680, 29880.843445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32367.458000, 30422.850000, 1359.392039, 1359.392039, 0.000000, X, Y) && !ellipse(33009.344116, 29681.947235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.638000, 29870.018000, 1000.728029, 1000.728029, 0.000000, X, Y) && !ellipse(33701.109344, 29357.099091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.000732, 29344.917816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33131.520599, 29022.496368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31168.691600, 29285.742000, 1441.040041, 1441.040041, 0.000000, X, Y) && !ellipse(29786.643005, 28577.901093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32732.769714, 28586.665344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31036.195374, 28669.913788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30196.547668, 28233.193329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28825.381683, 28485.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.645508, 27759.849396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29145.525116, 27942.061401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29749.000000, 27160.457947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30770.557037, 27289.792389, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul  3 04:10:12 2012] Writing fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src14.gif
[Tue Jul  3 04:15:12 2012] Mean detx,y = (2152.99, -4730.71) 
[Tue Jul  3 04:15:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 04:15:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 04:15:22 2012] Setting source spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul  3 04:15:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jul  3 04:30:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul  3 04:30:20 2012] rmf not generated due to insufficient counts
[Tue Jul  3 07:16:17 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:16:17 2012] Error reading totcts from fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul  3 07:16:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:16:17 2012] Using photon index=1.80, rate=0.0221, arf fullrun_pn_xmm0105260101_pi300-10000_pass1_cl_src14.arf
[Tue Jul  3 07:16:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:16:17 2012] Updating source flux to 7.3e-14
[Tue Jul  3 07:18:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting