[Mon Jul  2 19:06:19 2012] Detection parameters:
  Position = (330.5, 309.9) = 20 12 57.32 -56 53 0.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.5 +/- 21.8
  Background counts = 97.8
  Rate = 0.009 +/- 0.002

[Mon Jul  2 19:06:19 2012] Off-axis axis estimate = 2.47'
[Mon Jul  2 22:26:36 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 22:26:36 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Mon Jul  2 22:26:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Mon Jul  2 22:26:36 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.66"
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src9.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src9.csv
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src9.csv
[Tue Jul  3 00:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Tue Jul  3 00:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:11 2012] Warning, spatial fit 9 centroid is now closest to src. 5
[Tue Jul  3 00:08:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 00:08:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 00:08:11 2012] Assessing source extent using major
[Tue Jul  3 00:08:11 2012] Source does appear to be extended
[Tue Jul  3 00:08:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 00:08:11 2012] Source is confused with source 5
[Tue Jul  3 02:55:06 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 02:55:06 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Tue Jul  3 02:55:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.684
[Tue Jul  3 02:55:06 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.66"
[Tue Jul  3 04:09:48 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src6.ximg exists
[Tue Jul  3 04:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src6.csv
[Tue Jul  3 04:09:48 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue Jul  3 04:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src6.csv
[Tue Jul  3 04:09:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue Jul  3 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue Jul  3 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue Jul  3 04:09:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:10:04 2012] Warning, spatial fit 6 centroid is now closest to src. 5
[Tue Jul  3 04:10:04 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:10:04 2012] Assessing source extent using major
[Tue Jul  3 04:10:04 2012] Source does appear to be extended
[Tue Jul  3 04:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 05:57:18 2012] XMMSAS src. selection expression = ellipse(28705.000000, 26910.688721, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul  3 05:57:18 2012] Writing source region out to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src9_src.reg
[Tue Jul  3 05:57:18 2012] Extracting stamp from image fullrun_mos2_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (293, 272) - (368, 347)
[Tue Jul  3 05:57:18 2012] XMMSAS bgd. selection expression = annulus(28705.000000, 26910.688721, 1087.500000, 2175.000000, X, Y) && !ellipse(28161.058838, 26857.386353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30183.769012, 25713.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.486000, 27592.274000, 928.224027, 928.224027, 0.000000, X, Y) && !ellipse(29605.214000, 27857.604000, 2041.080059, 2041.080059, 0.000000, X, Y) && !ellipse(31491.910000, 29357.916000, 1511.976044, 1511.976044, 0.000000, X, Y) && !ellipse(27287.036000, 26400.199200, 1152.976033, 1152.976033, 0.000000, X, Y) && !ellipse(28944.611084, 28906.269806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.248000, 29067.078000, 3019.184087, 3019.184087, 0.000000, X, Y) && !ellipse(28574.653992, 26301.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28274.933044, 27781.055115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30202.412000, 28262.836000, 1375.160040, 1375.160040, 0.000000, X, Y) && !ellipse(30483.827148, 28397.178558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.351562, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.867096, 27384.452148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.476410, 28930.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29356.132660, 25969.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.370392, 25247.031433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.368000, 25211.386000, 1206.832035, 1206.832035, 0.000000, X, Y) && !ellipse(27102.474000, 27606.261000, 1157.112033, 1157.112033, 0.000000, X, Y)
[Tue Jul  3 05:57:18 2012] Writing fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src9.gif
[Tue Jul  3 05:58:14 2012] Mean detx,y = (-822.48, 555.63) 
[Tue Jul  3 05:58:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 05:58:20 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 05:58:20 2012] Setting source spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jul  3 05:58:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jul  3 06:11:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul  3 06:11:56 2012] rmf not generated due to insufficient counts
[Tue Jul  3 07:16:18 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:16:18 2012] Error reading totcts from fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jul  3 07:16:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:16:18 2012] Using photon index=1.80, rate=0.00944, arf fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src9.arf
[Tue Jul  3 07:16:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:16:18 2012] Updating source flux to 9.9e-14
[Tue Jul  3 07:16:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting