[Mon Jul  2 19:06:19 2012] Detection parameters:
  Position = (336.8, 321.8) = 20 12 53.96 -56 52 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.0 +/- 18.6
  Background counts = 120.4
  Rate = 0.009 +/- 0.001

[Mon Jul  2 19:06:19 2012] Off-axis axis estimate = 3.26'
[Mon Jul  2 22:26:36 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 22:26:36 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Mon Jul  2 22:26:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.723
[Mon Jul  2 22:26:36 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 8.06"
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src14.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src14.csv
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src14_1.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src14.csv
[Tue Jul  3 00:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src14.csv
[Tue Jul  3 00:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:11 2012] Warning, spatial fit 14 centroid is now closest to src. 30
[Tue Jul  3 00:08:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 00:08:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 00:08:11 2012] Assessing source extent using major
[Tue Jul  3 00:08:11 2012] Source does appear to be extended
[Tue Jul  3 00:08:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 00:08:11 2012] Source is confused with source 24
[Tue Jul  3 00:08:11 2012] Source is confused with source 23
[Tue Jul  3 02:55:06 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Tue Jul  3 02:55:06 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Tue Jul  3 02:55:06 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.723
[Tue Jul  3 02:55:06 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 8.06"
[Tue Jul  3 04:09:48 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src11.ximg exists
[Tue Jul  3 04:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src11.csv
[Tue Jul  3 04:09:48 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue Jul  3 04:09:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src11.csv
[Tue Jul  3 04:09:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue Jul  3 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Jul  3 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue Jul  3 04:09:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:10:04 2012] Warning, spatial fit 11 centroid is now closest to src. 31
[Tue Jul  3 04:10:04 2012] Spatial fit model total counts = 4191.330000, observed total counts = 3845.000000
[Tue Jul  3 04:10:04 2012] Offset between fit and detection position for source 28 = 4.143662 pixels
[Tue Jul  3 04:10:04 2012] Warning, changing simple spatial fit ID from 11 to 21
[Tue Jul  3 04:10:04 2012] 4183.161000 total counts/ 3918.260000 bgd. counts: snr = 4.231915
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 4.143662 pixels
  Position = (340.8, 320.8) = 20 12 51.84 -56 52 14.6
  Extent = 25.5 (7.8-34.4)", rotation angle = 0
  Source counts = 264.9 +/- 64.7
  Background counts = 3918.3
  Rate = 0.02 +/- 0.004
[Tue Jul  3 04:10:04 2012] Source 28 is offset by -2.460046 and 3.325816 pixels which is larger than
2 X fitted extent = 1.080832 x 1.080832, not incorporating fit results
[Tue Jul  3 04:10:04 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:10:04 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 04:10:04 2012] Source does appear to be extended
[Tue Jul  3 04:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 05:57:19 2012] XMMSAS src. selection expression = ellipse(29605.214000, 27857.604000, 1530.810044, 1530.810044, 0.000000, X, Y)
[Tue Jul  3 05:57:19 2012] Writing source region out to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src28_src.reg
[Tue Jul  3 05:57:19 2012] Extracting stamp from image fullrun_mos2_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (253, 233) - (429, 409)
[Tue Jul  3 05:57:19 2012] XMMSAS bgd. selection expression = annulus(29605.214000, 27857.604000, 2551.350073, 5102.700147, X, Y) && !ellipse(32216.338160, 25946.607800, 371.226411, 371.226411, 0.000000, X, Y) && !ellipse(32515.338745, 30321.859741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.058838, 26857.386353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30183.769012, 25713.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.000000, 26910.688721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.486000, 27592.274000, 928.224027, 928.224027, 0.000000, X, Y) && !ellipse(33713.468850, 30765.960402, 1538.872044, 765.505568, 339.260622, X, Y) && !ellipse(32801.802800, 29187.504200, 693.411220, 693.411220, 0.000000, X, Y) && !ellipse(30830.170410, 30217.636566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31491.910000, 29357.916000, 1511.976044, 1511.976044, 0.000000, X, Y) && !ellipse(31567.373810, 30660.572449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.036000, 26400.199200, 1152.976033, 1152.976033, 0.000000, X, Y) && !ellipse(28944.611084, 28906.269806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.248000, 29067.078000, 3019.184087, 3019.184087, 0.000000, X, Y) && !ellipse(28574.653992, 26301.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28274.933044, 27781.055115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30202.412000, 28262.836000, 1375.160040, 1375.160040, 0.000000, X, Y) && !ellipse(30483.827148, 28397.178558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.351562, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.867096, 27384.452148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.476410, 28930.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29356.132660, 25969.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.370392, 25247.031433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.368000, 25211.386000, 1206.832035, 1206.832035, 0.000000, X, Y) && !ellipse(27102.474000, 27606.261000, 1157.112033, 1157.112033, 0.000000, X, Y)
[Tue Jul  3 05:57:19 2012] Writing fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src28.gif
[Tue Jul  3 05:59:21 2012] Mean detx,y = (-1190.48, 1867.88) 
[Tue Jul  3 05:59:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 05:59:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 05:59:38 2012] Setting source spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jul  3 05:59:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jul  3 07:16:18 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:16:18 2012] Error reading totcts from fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jul  3 07:16:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:16:18 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src28.arf
[Tue Jul  3 07:16:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:16:18 2012] Updating source flux to 1.5e-13
[Tue Jul  3 07:16:48 2012] Flag b found in src. 28 procflags, skipping spectral fitting
[Tue Jul  3 07:16:48 2012] Flag c found in src. 28 procflags, skipping spectral fitting