[Mon Jul  2 19:06:19 2012] Detection parameters:
  Position = (346.1, 328.1) = 20 12 49.06 -56 51 41.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.9 +/- 20.5
  Background counts = 137.4
  Rate = 0.007 +/- 0.001

[Mon Jul  2 19:06:19 2012] Off-axis axis estimate = 4.07'
[Mon Jul  2 22:26:36 2012] Using EEF radius (= 8.46 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 22:26:36 2012] Initial guess for spatial extent in simple fitting = 8.46"
[Mon Jul  2 22:26:36 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.045
[Mon Jul  2 22:26:36 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.46"
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src28.ximg exists
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src28_1.ximg exists
[Tue Jul  3 00:07:52 2012] Fit fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src28 appears to have run properly
[Tue Jul  3 00:07:53 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Tue Jul  3 00:07:53 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Tue Jul  3 00:07:53 2012] Fit fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Tue Jul  3 00:08:11 2012] Warning, spatial fit 28 centroid is now closest to src. 18
[Tue Jul  3 00:08:11 2012] Spatial fit model total counts = 2099.220000, observed total counts = 2094.000000
[Tue Jul  3 00:08:11 2012] Offset between fit and detection position for source 23 = 2.319945 pixels
[Tue Jul  3 00:08:11 2012] Warning, changing simple spatial fit ID from 28 to 31
[Tue Jul  3 00:08:11 2012] 2100.838000 total counts/ 1901.000000 bgd. counts: snr = 4.583392
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.319945 pixels
  Position = (345.0, 326.0) = 20 12 49.65 -56 51 51.6
  Extent = 17.2 (17.1-34.4)", rotation angle = 0
  Source counts = 199.8 +/- 45.8
  Background counts = 1901.0
  Rate = 0.01 +/- 0.003
[Tue Jul  3 00:08:11 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 00:08:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 00:08:11 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 00:08:11 2012] Source does appear to be extended
[Tue Jul  3 00:08:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 00:08:11 2012] Source is confused with source 28
[Tue Jul  3 02:55:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul  3 02:55:06 2012] Initial guess for spatial extent in simple fitting = 17.19"
[Tue Jul  3 02:55:06 2012] source mask rpix=4.0, npix_max = 79, mask sum = 64, frac = 0.807
[Tue Jul  3 02:55:06 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 17.19"
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jul  3 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src21.csv
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jul  3 04:09:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src21.csv
[Tue Jul  3 04:09:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jul  3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jul  3 04:09:49 2012] Fit fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Jul  3 04:10:04 2012] Warning, spatial fit 21 centroid is now closest to src. 28
[Tue Jul  3 04:10:04 2012] Spatial fit model total counts = 2095.080000, observed total counts = 2094.000000
[Tue Jul  3 04:10:04 2012] Offset between fit and detection position for source 23 = 2.802809 pixels
[Tue Jul  3 04:10:04 2012] Warning, changing simple spatial fit ID from 21 to 22
[Tue Jul  3 04:10:04 2012] 2107.564000 total counts/ 1913.910000 bgd. counts: snr = 4.426553
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 2.802809 pixels
  Position = (347.7, 325.4) = 20 12 48.20 -56 51 54.3
  Extent = 17.2 (17.1-34.4)", rotation angle = 0
  Source counts = 193.7 +/- 45.9
  Background counts = 1913.9
  Rate = 0.01 +/- 0.003
[Tue Jul  3 04:10:04 2012] Vigneting correction estimate = 1.000000
[Tue Jul  3 04:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  3 04:10:04 2012] Assessing source extent using major axis lower bound
[Tue Jul  3 04:10:04 2012] Source does appear to be extended
[Tue Jul  3 04:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  3 05:57:19 2012] XMMSAS src. selection expression = ellipse(30202.412000, 28262.836000, 1031.370030, 1031.370030, 0.000000, X, Y)
[Tue Jul  3 05:57:19 2012] Writing source region out to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src23_src.reg
[Tue Jul  3 05:57:19 2012] Extracting stamp from image fullrun_mos2_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (288, 266) - (407, 385)
[Tue Jul  3 05:57:19 2012] XMMSAS bgd. selection expression = annulus(30202.412000, 28262.836000, 1718.950049, 3437.900099, X, Y) && !ellipse(32216.338160, 25946.607800, 371.226411, 371.226411, 0.000000, X, Y) && !ellipse(32515.338745, 30321.859741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.058838, 26857.386353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30183.769012, 25713.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.000000, 26910.688721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.486000, 27592.274000, 928.224027, 928.224027, 0.000000, X, Y) && !ellipse(33713.468850, 30765.960402, 1538.872044, 765.505568, 339.260622, X, Y) && !ellipse(32801.802800, 29187.504200, 693.411220, 693.411220, 0.000000, X, Y) && !ellipse(30830.170410, 30217.636566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29605.214000, 27857.604000, 2041.080059, 2041.080059, 0.000000, X, Y) && !ellipse(31491.910000, 29357.916000, 1511.976044, 1511.976044, 0.000000, X, Y) && !ellipse(31567.373810, 30660.572449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.036000, 26400.199200, 1152.976033, 1152.976033, 0.000000, X, Y) && !ellipse(28944.611084, 28906.269806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.248000, 29067.078000, 3019.184087, 3019.184087, 0.000000, X, Y) && !ellipse(28574.653992, 26301.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28274.933044, 27781.055115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30483.827148, 28397.178558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.351562, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.867096, 27384.452148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.476410, 28930.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29356.132660, 25969.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.370392, 25247.031433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.368000, 25211.386000, 1206.832035, 1206.832035, 0.000000, X, Y) && !ellipse(27102.474000, 27606.261000, 1157.112033, 1157.112033, 0.000000, X, Y)
[Tue Jul  3 05:57:19 2012] Writing fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src23.gif
[Tue Jul  3 06:06:24 2012] Mean detx,y = (-1528.91, 2465.03) 
[Tue Jul  3 06:06:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul  3 06:06:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jul  3 06:06:31 2012] Setting source spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Jul  3 06:06:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Jul  3 07:16:18 2012] Updating aperture counts using extracted products
[Tue Jul  3 07:16:18 2012] Error reading totcts from fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Jul  3 07:16:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul  3 07:16:18 2012] Using photon index=1.80, rate=0.0119, arf fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src23.arf
[Tue Jul  3 07:16:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul  3 07:16:19 2012] Updating source flux to 1.3e-13
[Tue Jul  3 07:16:48 2012] Flag c found in src. 23 procflags, skipping spectral fitting