[Mon Jul 2 19:06:19 2012] Detection parameters: Position = (368.8, 343.1) = 20 12 37.03 -56 50 38.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 109.7 +/- 22.6 Background counts = 167.6 Rate = 0.008 +/- 0.002 [Mon Jul 2 19:06:19 2012] Off-axis axis estimate = 6.04' [Mon Jul 2 22:26:36 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting [Mon Jul 2 22:26:36 2012] Initial guess for spatial extent in simple fitting = 9.45" [Mon Jul 2 22:26:36 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.050 [Mon Jul 2 22:26:36 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.45" [Tue Jul 3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src15.ximg exists [Tue Jul 3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src15.csv [Tue Jul 3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src15_1.ximg exists [Tue Jul 3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src15.csv [Tue Jul 3 00:07:52 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Tue Jul 3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Tue Jul 3 00:07:52 2012] Fit fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Tue Jul 3 00:08:11 2012] Spatial fit model total counts = 2489.690000, observed total counts = 2484.000000 [Tue Jul 3 00:08:11 2012] Offset between fit and detection position for source 15 = 8.082739 pixels [Tue Jul 3 00:08:11 2012] 2505.057000 total counts/ 2297.340000 bgd. counts: snr = 4.333706 Spatial fit parameters: Offset between fit and detection position for source 15 = 8.082739 pixels Position = (362.5, 338.0) = 20 12 40.35 -56 50 59.4 Extent = 18.9 (18.9-37.8)", rotation angle = 0 Source counts = 207.7 +/- 50.1 Background counts = 2297.3 Rate = 0.01 +/- 0.003 [Tue Jul 3 00:08:11 2012] Vigneting correction estimate = 1.000000 [Tue Jul 3 00:08:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 3 00:08:11 2012] Assessing source extent using major axis lower bound [Tue Jul 3 00:08:11 2012] Source does appear to be extended [Tue Jul 3 00:08:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jul 3 00:08:11 2012] Source is confused with source 13 [Tue Jul 3 02:55:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Jul 3 02:55:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Jul 3 02:55:06 2012] Initial guess for spatial extent in simple fitting = 18.90" [Tue Jul 3 02:55:06 2012] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.959 [Tue Jul 3 02:55:06 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 18.90" [Tue Jul 3 04:09:48 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src12.ximg exists [Tue Jul 3 04:09:48 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src12_1.ximg exists [Tue Jul 3 04:09:48 2012] Fit fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_src12 appears to have run properly [Tue Jul 3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Tue Jul 3 04:09:49 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Tue Jul 3 04:09:49 2012] Fit fullrun_mos2_xmm0105260101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly [Tue Jul 3 04:10:04 2012] Warning, spatial fit 12 centroid is now closest to src. 25 [Tue Jul 3 04:10:04 2012] Source 15 is offset by 3.575313 and 2.066437 pixels which is larger than 2 X fitted extent = 1.021770 x 1.021770, not incorporating fit results [Tue Jul 3 04:10:04 2012] Vigneting correction estimate = 1.000000 [Tue Jul 3 04:10:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Jul 3 04:10:04 2012] Assessing source extent using major axis lower bound [Tue Jul 3 04:10:04 2012] Source does appear to be extended [Tue Jul 3 04:10:04 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Jul 3 05:57:19 2012] XMMSAS src. selection expression = ellipse(31491.910000, 29357.916000, 1133.982033, 1133.982033, 0.000000, X, Y) [Tue Jul 3 05:57:19 2012] Writing source region out to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src15_src.reg [Tue Jul 3 05:57:19 2012] Extracting stamp from image fullrun_mos2_xmm0105260101_pi300-10000_cl_sm2.00.img.gz, (297, 273) - (428, 403) [Tue Jul 3 05:57:19 2012] XMMSAS bgd. selection expression = annulus(31491.910000, 29357.916000, 1889.970054, 3779.940109, X, Y) && !ellipse(32216.338160, 25946.607800, 371.226411, 371.226411, 0.000000, X, Y) && !ellipse(32515.338745, 30321.859741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28161.058838, 26857.386353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30183.769012, 25713.597076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.000000, 26910.688721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.486000, 27592.274000, 928.224027, 928.224027, 0.000000, X, Y) && !ellipse(33713.468850, 30765.960402, 1538.872044, 765.505568, 339.260622, X, Y) && !ellipse(32801.802800, 29187.504200, 693.411220, 693.411220, 0.000000, X, Y) && !ellipse(30830.170410, 30217.636566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29605.214000, 27857.604000, 2041.080059, 2041.080059, 0.000000, X, Y) && !ellipse(31567.373810, 30660.572449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27287.036000, 26400.199200, 1152.976033, 1152.976033, 0.000000, X, Y) && !ellipse(28944.611084, 28906.269806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30724.248000, 29067.078000, 3019.184087, 3019.184087, 0.000000, X, Y) && !ellipse(28574.653992, 26301.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28274.933044, 27781.055115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30202.412000, 28262.836000, 1375.160040, 1375.160040, 0.000000, X, Y) && !ellipse(30483.827148, 28397.178558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28462.351562, 28309.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.867096, 27384.452148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28260.476410, 28930.024353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29356.132660, 25969.913605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.370392, 25247.031433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28815.368000, 25211.386000, 1206.832035, 1206.832035, 0.000000, X, Y) && !ellipse(27102.474000, 27606.261000, 1157.112033, 1157.112033, 0.000000, X, Y) [Tue Jul 3 05:57:19 2012] Writing fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src15.gif [Tue Jul 3 05:59:41 2012] Mean detx,y = (-2097.74, 4037.73) [Tue Jul 3 05:59:41 2012] Setting backscal keywords in source and bgd. spectrum [Tue Jul 3 05:59:56 2012] Binned source spectrum to 10 counts/bin [Tue Jul 3 05:59:56 2012] Setting source spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Tue Jul 3 05:59:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src15_bgd.pi.gz [Tue Jul 3 07:16:18 2012] Updating aperture counts using extracted products [Tue Jul 3 07:16:18 2012] Error reading totcts from fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Tue Jul 3 07:16:18 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jul 3 07:16:18 2012] Using photon index=1.80, rate=0.0128, arf fullrun_mos2_xmm0105260101_pi300-10000_pass1_cl_src15.arf [Tue Jul 3 07:16:18 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jul 3 07:16:18 2012] Updating source flux to 1.5e-13 [Tue Jul 3 07:16:48 2012] Flag b found in src. 15 procflags, skipping spectral fitting [Tue Jul 3 07:16:48 2012] Flag c found in src. 15 procflags, skipping spectral fitting