[Mon Jul  2 19:06:19 2012] Detection parameters:
  Position = (349.7, 341.9) = 20 12 47.15 -56 50 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 20.9
  Background counts = 144.8
  Rate = 0.008 +/- 0.002

[Mon Jul  2 19:06:19 2012] Off-axis axis estimate = 4.87'
[Mon Jul  2 22:26:36 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 22:26:36 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Mon Jul  2 22:26:36 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Mon Jul  2 22:26:36 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.87"
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src16.csv
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src16.csv
[Tue Jul  3 00:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jul  3 00:07:52 2012] fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jul  3 00:07:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jul  3 00:07:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:11 2012] Spatial fit model total counts = 2157.940000, observed total counts = 1889.000000
[Tue Jul  3 00:08:11 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul  3 00:08:11 2012] Source 14 is offset by 3.115614 and 5.313460 pixels which is larger than
2 X fitted extent = 0.948474 x 0.948474, not incorporating fit results
[Tue Jul  3 00:08:11 2012] Source 14 is offset by -4.492225 and 4.202862 pixels which is larger than
2 X fitted extent = 7.618851 x 1.424589, not incorporating fit results
[Tue Jul  3 00:08:11 2012] Spatial fit model total counts = 2254.320000, observed total counts = 2257.000000
[Tue Jul  3 00:08:11 2012] Offset between fit and detection position for source 14 = 4.858568 pixels
[Tue Jul  3 00:08:11 2012] Warning, changing simple spatial fit ID from 16 to 23
[Tue Jul  3 00:08:11 2012] 2245.720024 total counts/ 2245.720000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 4.858568 pixels
  Position = (350.8, 337.2) = 20 12 46.56 -56 51 3.1
  Extent = 17.8 (2.2-33.3)", rotation angle = 0
  Source counts = 0.0 +/- 47.4
  Background counts = 2245.7
  Rate = 1e-09 +/- 0.003
  Deleting source due to low Poisson probability