[Mon Jul  2 19:05:59 2012] Detection parameters:
  Position = (399.2, 356.8) = 20 12 20.95 -56 49 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.6 +/- 20.6
  Background counts = 149.4
  Rate = 0.01 +/- 0.002

[Mon Jul  2 19:06:00 2012] Off-axis axis estimate = 8.44'
[Mon Jul  2 21:33:55 2012] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Mon Jul  2 21:33:55 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Mon Jul  2 21:33:55 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Mon Jul  2 21:33:55 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.65"
[Mon Jul  2 22:26:35 2012] fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jul  2 22:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_src6.csv
[Mon Jul  2 22:26:35 2012] fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jul  2 22:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_src6.csv
[Mon Jul  2 22:26:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  2 22:26:35 2012] fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jul  2 22:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jul  2 22:26:35 2012] fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jul  2 22:26:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jul  2 22:26:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0105260101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  3 00:08:05 2012] Spatial fit model total counts = 1530.200000, observed total counts = 1502.000000
[Tue Jul  3 00:08:05 2012] Offset between fit and detection position for source 4 = 3.096107 pixels
[Tue Jul  3 00:08:05 2012] Warning, changing simple spatial fit ID from 6 to 2
[Tue Jul  3 00:08:05 2012] 1489.813400 total counts/ 1429.870000 bgd. counts: snr = 1.585233
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 3.096107 pixels
  Position = (401.2, 359.1) = 20 12 19.86 -56 49 27.1
  Extent = 10.5 (4.9-15.1)", rotation angle = 0
  Source counts = 59.9 +/- 38.6
  Background counts = 1429.9
  Rate = 0.004 +/- 0.002
  Deleting source due to low Poisson probability