[Fri Aug 17 10:57:29 2012] Detection parameters:
  Position = (220.3, 474.5) = 12 20 42.29 6 52 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.4 +/- 14.8
  Background counts = 49.4
  Rate = 0.009 +/- 0.002

[Fri Aug 17 10:57:29 2012] Off-axis axis estimate = 13.97'
[Fri Aug 17 10:59:38 2012] Using EEF radius (= 13.41 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 10:59:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 10:59:38 2012] Initial guess for spatial extent in simple fitting = 13.41"
[Fri Aug 17 10:59:38 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.954
[Fri Aug 17 10:59:38 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.41"
[Fri Aug 17 11:13:18 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Aug 17 11:13:18 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Aug 17 11:13:18 2012] Fit fullrun_pn_xmm0105070101_pi300-10000_cl_pass0_src11 appears to have run properly
[Fri Aug 17 11:13:18 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Aug 17 11:13:18 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Aug 17 11:13:18 2012] Fit fullrun_pn_xmm0105070101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Aug 17 11:40:18 2012] Spatial fit model total counts = 89.905300, observed total counts = 94.000000
[Fri Aug 17 11:40:18 2012] Offset between fit and detection position for source 12 = 1.701215 pixels
[Fri Aug 17 11:40:18 2012] 96.332600 total counts/ 11.635900 bgd. counts: snr = 24.829416
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.701215 pixels
  Position = (218.6, 474.4) = 12 20 42.79 6 52 26.0
  Extent = 15.3 (10.0-19.8)", rotation angle = 0
  Source counts = 84.7 +/- 9.8
  Background counts = 11.6
  Rate = 0.02 +/- 0.002
[Fri Aug 17 11:40:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:40:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:40:18 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 11:40:18 2012] Source does appear to be extended
[Fri Aug 17 11:40:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 11:40:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 11:40:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 17 11:40:27 2012] Initial guess for spatial extent in simple fitting = 15.32"
[Fri Aug 17 11:40:27 2012] source mask rpix=3.5, npix_max = 64, mask sum = 60, frac = 0.927
[Fri Aug 17 11:40:27 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 15.32"
[Fri Aug 17 11:54:19 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Aug 17 11:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_src10.csv
[Fri Aug 17 11:54:19 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Aug 17 11:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_src10.csv
[Fri Aug 17 11:54:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:54:19 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Aug 17 11:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Aug 17 11:54:19 2012] fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Aug 17 11:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Aug 17 11:54:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 12:20:29 2012] Spatial fit model total counts = 141.985000, observed total counts = 109.000000
[Fri Aug 17 12:20:29 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 17 12:20:29 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 12:20:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 12:20:29 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 12:20:29 2012] Source does appear to be extended
[Fri Aug 17 12:20:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:20:38 2012] XMMSAS src. selection expression = ellipse(18972.253600, 41226.422400, 919.485872, 919.485872, 0.000000, X, Y)
[Fri Aug 17 12:20:38 2012] Writing source region out to fullrun_pn_xmm0105070101_pi300-10000_pass1_cl_src12_src.reg
[Fri Aug 17 12:20:38 2012] Extracting stamp from image fullrun_pn_xmm0105070101_pi300-10000_cl_sm2.00.img.gz, (166, 422) - (271, 527)
[Fri Aug 17 12:20:38 2012] XMMSAS bgd. selection expression = annulus(18972.253600, 41226.422400, 1532.476453, 3064.952905, X, Y)
[Fri Aug 17 12:20:38 2012] Writing fullrun_pn_xmm0105070101_pi300-10000_pass1_cl_src12.gif
[Fri Aug 17 12:26:13 2012] Mean detx,y = (-1528.50, -15341.70) 
[Fri Aug 17 12:26:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 12:26:46 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 12:26:47 2012] Setting source spectrum file to fullrun_pn_xmm0105070101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 17 12:26:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0105070101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Aug 17 12:33:29 2012] Not generating rmf since there are only 84 counts
[Fri Aug 17 12:33:29 2012] rmf not generated due to insufficient counts
[Fri Aug 17 12:54:51 2012] Updating aperture counts using extracted products
[Fri Aug 17 12:54:51 2012] Error reading totcts from fullrun_pn_xmm0105070101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Aug 17 12:54:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 12:54:51 2012] Using photon index=1.80, rate=0.0215, arf fullrun_pn_xmm0105070101_pi300-10000_pass1_cl_src12.arf
[Fri Aug 17 12:54:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 12:54:51 2012] Updating source flux to 1.8e-13
[Fri Aug 17 12:55:18 2012] Flag p found in src. 12 procflags, skipping spectral fitting
[Fri Aug 17 12:55:18 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting