[Fri Aug 17 10:58:07 2012] Detection parameters:
  Position = (290.1, 206.3) = 12 20 21.91 6 33 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.2 +/- 13.0
  Background counts = 15.3
  Rate = 0.01 +/- 0.002

[Fri Aug 17 10:58:08 2012] Off-axis axis estimate = 6.70'
[Fri Aug 17 11:24:51 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Aug 17 11:24:51 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Aug 17 11:24:51 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.993
[Fri Aug 17 11:24:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.78"
[Fri Aug 17 11:40:15 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Aug 17 11:40:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_src5.csv
[Fri Aug 17 11:40:15 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Aug 17 11:40:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_src5.csv
[Fri Aug 17 11:40:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 11:40:15 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Aug 17 11:40:15 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Aug 17 11:40:16 2012] Fit fullrun_mos2_xmm0105070101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Aug 17 11:40:22 2012] Spatial fit model total counts = 130.977000, observed total counts = 131.000000
[Fri Aug 17 11:40:22 2012] Offset between fit and detection position for source 5 = 0.159964 pixels
[Fri Aug 17 11:40:22 2012] 129.200700 total counts/ 73.125000 bgd. counts: snr = 6.557552
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.159964 pixels
  Position = (290.1, 206.5) = 12 20 21.90 6 33 0.5
  Extent = 5.0 (3.7-6.3)", rotation angle = 0
  Source counts = 56.1 +/- 11.4
  Background counts = 73.1
  Rate = 0.006 +/- 0.001
[Fri Aug 17 11:40:22 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 11:40:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 11:40:22 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 11:40:22 2012] Source does appear to be extended
[Fri Aug 17 11:40:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:05:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 17 12:05:15 2012] Initial guess for spatial extent in simple fitting = 4.98"
[Fri Aug 17 12:05:15 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.109
[Fri Aug 17 12:05:15 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.98"
[Fri Aug 17 12:20:26 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Aug 17 12:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_src5.csv
[Fri Aug 17 12:20:26 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Aug 17 12:20:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_src5.csv
[Fri Aug 17 12:20:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 17 12:20:26 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Aug 17 12:20:26 2012] fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Aug 17 12:20:26 2012] Fit fullrun_mos2_xmm0105070101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Aug 17 12:20:32 2012] Spatial fit model total counts = 130.882000, observed total counts = 131.000000
[Fri Aug 17 12:20:32 2012] Offset between fit and detection position for source 5 = 0.006128 pixels
[Fri Aug 17 12:20:32 2012] 129.127400 total counts/ 73.651500 bgd. counts: snr = 6.464182
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.006128 pixels
  Position = (290.1, 206.5) = 12 20 21.90 6 33 0.5
  Extent = 4.9 (3.7-6.3)", rotation angle = 0
  Source counts = 55.5 +/- 11.4
  Background counts = 73.7
  Rate = 0.006 +/- 0.001
[Fri Aug 17 12:20:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 17 12:20:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 17 12:20:32 2012] Assessing source extent using major axis lower bound
[Fri Aug 17 12:20:32 2012] Source does appear to be extended
[Fri Aug 17 12:20:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 17 12:44:17 2012] XMMSAS src. selection expression = ellipse(25193.798540, 17915.078800, 292.917008, 292.917008, 0.000000, X, Y)
[Fri Aug 17 12:44:17 2012] Writing source region out to fullrun_mos2_xmm0105070101_pi300-10000_pass1_cl_src5_src.reg
[Fri Aug 17 12:44:17 2012] Extracting stamp from image fullrun_mos2_xmm0105070101_pi300-10000_cl_sm2.00.img.gz, (273, 190) - (307, 223)
[Fri Aug 17 12:44:17 2012] XMMSAS bgd. selection expression = annulus(25193.798540, 17915.078800, 488.195014, 976.390028, X, Y)
[Fri Aug 17 12:44:17 2012] Writing fullrun_mos2_xmm0105070101_pi300-10000_pass1_cl_src5.gif
[Fri Aug 17 12:47:44 2012] Mean detx,y = (4804.69, -8796.99) 
[Fri Aug 17 12:47:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 17 12:47:59 2012] Binned source spectrum to 10 counts/bin
[Fri Aug 17 12:47:59 2012] Setting source spectrum file to fullrun_mos2_xmm0105070101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug 17 12:47:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0105070101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Aug 17 12:53:47 2012] Not generating rmf since there are only 55 counts
[Fri Aug 17 12:53:47 2012] rmf not generated due to insufficient counts
[Fri Aug 17 12:54:51 2012] Updating aperture counts using extracted products
[Fri Aug 17 12:54:51 2012] Error reading totcts from fullrun_mos2_xmm0105070101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Aug 17 12:54:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug 17 12:54:51 2012] Using photon index=1.80, rate=0.00587, arf fullrun_mos2_xmm0105070101_pi300-10000_pass1_cl_src5.arf
[Fri Aug 17 12:54:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug 17 12:54:51 2012] Updating source flux to 1.3e-13
[Fri Aug 17 12:55:03 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting