[Fri Aug 31 05:31:43 2012] Detection parameters:
  Position = (202.9, 253.4) = 11 11 22.77 48 26 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.8 +/- 12.2
  Background counts = 31.4
  Rate = 0.002 +/- 0.0004

[Fri Aug 31 05:31:43 2012] Off-axis axis estimate = 7.66'
[Fri Aug 31 05:33:44 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 05:33:44 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Fri Aug 31 05:33:44 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.918
[Fri Aug 31 05:33:44 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 10.26"
[Fri Aug 31 06:27:37 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_src51.ximg exists
[Fri Aug 31 06:27:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_src51.csv
[Fri Aug 31 06:27:37 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_src51_1.ximg exists
[Fri Aug 31 06:27:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_src51.csv
[Fri Aug 31 06:27:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 06:27:37 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Fri Aug 31 06:27:37 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Fri Aug 31 06:27:37 2012] Fit fullrun_pn_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Fri Aug 31 07:46:18 2012] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 13.182470 pixels away
[Fri Aug 31 07:46:18 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 07:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 07:46:18 2012] Assessing source extent using major
[Fri Aug 31 07:46:18 2012] Source does appear to be extended
[Fri Aug 31 07:46:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 07:46:40 2012] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 07:46:40 2012] Initial guess for spatial extent in simple fitting = 10.26"
[Fri Aug 31 07:46:40 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.918
[Fri Aug 31 07:46:40 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 10.26"
[Fri Aug 31 08:40:21 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_src48.ximg exists
[Fri Aug 31 08:40:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_src48.csv
[Fri Aug 31 08:40:21 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_src48_1.ximg exists
[Fri Aug 31 08:40:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_src48.csv
[Fri Aug 31 08:40:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 08:40:21 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Fri Aug 31 08:40:21 2012] fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Fri Aug 31 08:40:21 2012] Fit fullrun_pn_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Fri Aug 31 09:56:52 2012] Source 52 is offset by 7.355032 and -5.361979 pixels which is larger than
2 X fitted extent = 2.252607 x 2.252607, not incorporating fit results
[Fri Aug 31 09:56:53 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 09:56:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 09:56:53 2012] Assessing source extent using major
[Fri Aug 31 09:56:53 2012] Source does appear to be extended
[Fri Aug 31 09:56:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 09:57:16 2012] XMMSAS src. selection expression = ellipse(17604.331802, 21995.387848, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Aug 31 09:57:16 2012] Writing source region out to fullrun_pn_xmm0104861001_pi300-10000_pass1_cl_src52_src.reg
[Fri Aug 31 09:57:16 2012] Extracting stamp from image fullrun_pn_xmm0104861001_pi300-10000_cl_sm2.00.img.gz, (165, 216) - (240, 291)
[Fri Aug 31 09:57:16 2012] XMMSAS bgd. selection expression = annulus(17604.331802, 21995.387848, 1087.500000, 2175.000000, X, Y)
[Fri Aug 31 09:57:16 2012] Writing fullrun_pn_xmm0104861001_pi300-10000_pass1_cl_src52.gif
[Fri Aug 31 10:19:31 2012] Mean detx,y = (-10231.50, 2204.75) 
[Fri Aug 31 10:19:33 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 10:19:41 2012] grppha failed
[Fri Aug 31 10:19:41 2012] Setting source spectrum file to fullrun_pn_xmm0104861001_pi300-10000_pass1_cl_src52_src.pi.gz
[Fri Aug 31 10:19:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0104861001_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Fri Aug 31 10:23:13 2012] Not generating rmf since there are only 59 counts
[Fri Aug 31 10:23:13 2012] rmf not generated due to insufficient counts
[Fri Aug 31 10:50:03 2012] Updating aperture counts using extracted products
[Fri Aug 31 10:50:03 2012] Error reading totcts from fullrun_pn_xmm0104861001_pi300-10000_pass1_cl_src52_src.pi.gz
[Fri Aug 31 10:50:03 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 10:50:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Aug 31 10:50:09 2012] xmm0104861001/analysis//spectral/fullrun_pn_xmm0104861001_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete