[Fri Aug 31 05:32:19 2012] Detection parameters:
  Position = (311.4, 271.2) = 11 10 35.35 48 27 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.6 +/- 9.0
  Background counts = 10.4
  Rate = 0.001 +/- 0.0003

[Fri Aug 31 05:32:19 2012] Off-axis axis estimate = 2.19'
[Fri Aug 31 07:06:14 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 07:06:14 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Aug 31 07:06:14 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.006
[Fri Aug 31 07:06:14 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.52"
[Fri Aug 31 07:46:08 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src39.ximg exists
[Fri Aug 31 07:46:08 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Aug 31 07:46:08 2012] Fit fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src39 appears to have run properly
[Fri Aug 31 07:46:09 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Aug 31 07:46:09 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Aug 31 07:46:09 2012] Fit fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Aug 31 07:46:28 2012] Spatial fit model total counts = 135.676000, observed total counts = 141.000000
[Fri Aug 31 07:46:28 2012] Offset between fit and detection position for source 36 = 3.572431 pixels
[Fri Aug 31 07:46:28 2012] 133.333600 total counts/ 22.585600 bgd. counts: snr = 23.303442
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.572431 pixels
  Position = (314.9, 271.6) = 11 10 33.80 48 27 34.5
  Extent = 25.7" x 25.7", rotation angle = 0
  Source counts = 110.7 +/- 11.5
  Background counts = 22.6
  Rate = 0.003 +/- 0.0003
[Fri Aug 31 07:46:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 07:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 07:46:28 2012] Assessing source extent using major
[Fri Aug 31 07:46:28 2012] Source does appear to be extended
[Fri Aug 31 07:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 09:16:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 09:16:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 31 09:16:29 2012] Initial guess for spatial extent in simple fitting = 25.71"
[Fri Aug 31 09:16:29 2012] source mask rpix=5.9, npix_max = 164, mask sum = 156, frac = 0.949
[Fri Aug 31 09:16:29 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 25.71"
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src39.ximg exists
[Fri Aug 31 09:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src39.csv
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri Aug 31 09:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src39.csv
[Fri Aug 31 09:56:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Aug 31 09:56:41 2012] Fit fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Aug 31 09:57:03 2012] Source 36 is offset by 4.095954 and 0.260917 pixels which is larger than
2 X fitted extent = 2.955715 x 2.955715, not incorporating fit results
[Fri Aug 31 09:57:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 09:57:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 09:57:03 2012] Assessing source extent using major
[Fri Aug 31 09:57:03 2012] Source does appear to be extended
[Fri Aug 31 09:57:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 10:34:59 2012] XMMSAS src. selection expression = ellipse(27350.366000, 23577.381800, 1542.882044, 1542.882044, 0.000000, X, Y)
[Fri Aug 31 10:34:59 2012] Writing source region out to fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src36_src.reg
[Fri Aug 31 10:34:59 2012] Extracting stamp from image fullrun_mos2_xmm0104861001_pi300-10000_cl_sm2.00.img.gz, (226, 183) - (404, 360)
[Fri Aug 31 10:34:59 2012] XMMSAS bgd. selection expression = annulus(27350.366000, 23577.381800, 2571.470074, 5142.940148, X, Y) && !ellipse(26385.662220, 28002.858800, 377.619211, 377.619211, 0.000000, X, Y) && !ellipse(32764.831848, 25276.669525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25168.643220, 22039.662800, 316.155209, 316.155209, 0.000000, X, Y) && !ellipse(30121.517500, 25091.634400, 382.047211, 382.047211, 0.000000, X, Y) && !ellipse(29443.714111, 18634.288025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23152.125702, 29152.696350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26978.177200, 18393.234800, 411.013612, 411.013612, 0.000000, X, Y) && !ellipse(31607.901200, 19400.566800, 387.520811, 387.520811, 0.000000, X, Y) && !ellipse(27136.400823, 18560.197651, 1224.245449, 529.537330, 324.579258, X, Y)
[Fri Aug 31 10:34:59 2012] Writing fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src36.gif
[Fri Aug 31 10:46:14 2012] Mean detx,y = (744.29, -4409.61) 
[Fri Aug 31 10:46:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 10:46:52 2012] grppha failed
[Fri Aug 31 10:46:52 2012] Setting source spectrum file to fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src36_src.pi.gz
[Fri Aug 31 10:46:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Fri Aug 31 10:50:04 2012] Updating aperture counts using extracted products
[Fri Aug 31 10:50:04 2012] Error reading totcts from fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src36_src.pi.gz
[Fri Aug 31 10:50:04 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 10:50:07 2012] Flag b found in src. 36 procflags, skipping spectral fitting
[Fri Aug 31 10:50:07 2012] Source 36 has no response, skipping
[Fri Aug 31 10:50:08 2012] xmm0104861001/analysis//spectral/fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete