[Fri Aug 31 05:32:19 2012] Detection parameters:
  Position = (411.2, 161.6) = 11 9 51.82 48 19 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.0 +/- 8.4
  Background counts = 9.3
  Rate = 0.001 +/- 0.0002

[Fri Aug 31 05:32:19 2012] Off-axis axis estimate = 12.86'
[Fri Aug 31 07:06:14 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 07:06:14 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Fri Aug 31 07:06:14 2012] source mask rpix=3.0, npix_max = 47, mask sum = 48, frac = 1.005
[Fri Aug 31 07:06:14 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.86"
[Fri Aug 31 07:46:08 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src42.ximg exists
[Fri Aug 31 07:46:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src42.csv
[Fri Aug 31 07:46:08 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Aug 31 07:46:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src42.csv
[Fri Aug 31 07:46:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 07:46:09 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Aug 31 07:46:09 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Aug 31 07:46:09 2012] Fit fullrun_mos2_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Fri Aug 31 07:46:28 2012] Spatial fit model total counts = 158.558000, observed total counts = 155.000000
[Fri Aug 31 07:46:28 2012] Offset between fit and detection position for source 22 = 3.726247 pixels
[Fri Aug 31 07:46:28 2012] 155.591800 total counts/ 28.584800 bgd. counts: snr = 23.755276
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.726247 pixels
  Position = (414.9, 161.6) = 11 9 50.20 48 19 35.3
  Extent = 25.7 (25.7-51.4)", rotation angle = 0
  Source counts = 127.0 +/- 12.5
  Background counts = 28.6
  Rate = 0.004 +/- 0.0004
[Fri Aug 31 07:46:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 07:46:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 07:46:28 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 07:46:28 2012] Source does appear to be extended
[Fri Aug 31 07:46:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 09:16:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 09:16:29 2012] Initial guess for spatial extent in simple fitting = 25.71"
[Fri Aug 31 09:16:29 2012] source mask rpix=5.9, npix_max = 164, mask sum = 151, frac = 0.918
[Fri Aug 31 09:16:29 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 25.71"
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src42.ximg exists
[Fri Aug 31 09:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src42.csv
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri Aug 31 09:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src42.csv
[Fri Aug 31 09:56:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri Aug 31 09:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Aug 31 09:56:41 2012] fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Aug 31 09:56:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Aug 31 09:56:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 09:57:03 2012] Spatial fit model total counts = 472.913000, observed total counts = 403.000000
[Fri Aug 31 09:57:03 2012] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 31 09:57:03 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 09:57:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 09:57:03 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 09:57:03 2012] Source does appear to be extended
[Fri Aug 31 09:57:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 10:35:00 2012] XMMSAS src. selection expression = ellipse(36050.366000, 14007.381800, 1542.882044, 1542.882044, 0.000000, X, Y)
[Fri Aug 31 10:35:00 2012] Writing source region out to fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src22_src.reg
[Fri Aug 31 10:35:00 2012] Extracting stamp from image fullrun_mos2_xmm0104861001_pi300-10000_cl_sm2.00.img.gz, (326, 73) - (504, 250)
[Fri Aug 31 10:35:00 2012] XMMSAS bgd. selection expression = annulus(36050.366000, 14007.381800, 2571.470074, 5142.940148, X, Y) && !ellipse(31607.901200, 19400.566800, 387.520811, 387.520811, 0.000000, X, Y) && !ellipse(32821.421143, 14885.125137, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 10:35:00 2012] Writing fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src22.gif
[Fri Aug 31 10:47:18 2012] Mean detx,y = (-4183.38, -16233.49) 
[Fri Aug 31 10:47:19 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 10:48:18 2012] grppha failed
[Fri Aug 31 10:48:18 2012] Setting source spectrum file to fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src22_src.pi.gz
[Fri Aug 31 10:48:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Aug 31 10:50:04 2012] Updating aperture counts using extracted products
[Fri Aug 31 10:50:04 2012] Error reading totcts from fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src22_src.pi.gz
[Fri Aug 31 10:50:04 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 10:50:07 2012] Flag p found in src. 22 procflags, skipping spectral fitting
[Fri Aug 31 10:50:07 2012] Source 22 has no response, skipping
[Fri Aug 31 10:50:08 2012] xmm0104861001/analysis//spectral/fullrun_mos2_xmm0104861001_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete