[Fri Aug 31 05:32:00 2012] Detection parameters:
  Position = (338.7, 386.0) = 11 10 23.37 48 35 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.7 +/- 8.3
  Background counts = 11.9
  Rate = 0.002 +/- 0.0003

[Fri Aug 31 05:32:01 2012] Off-axis axis estimate = 6.99'
[Fri Aug 31 06:27:37 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 06:27:37 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Aug 31 06:27:37 2012] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.679
[Fri Aug 31 06:27:37 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.92"
[Fri Aug 31 07:06:14 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_src33.ximg exists
[Fri Aug 31 07:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_src33.csv
[Fri Aug 31 07:06:14 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Aug 31 07:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_src33.csv
[Fri Aug 31 07:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 07:06:14 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Aug 31 07:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Aug 31 07:06:14 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Aug 31 07:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Fri Aug 31 07:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104861001_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 07:46:23 2012] Warning, spatial fit 33 centroid is now closest to src. 13
[Fri Aug 31 07:46:23 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 07:46:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 07:46:23 2012] Assessing source extent using major
[Fri Aug 31 07:46:23 2012] Source does appear to be extended
[Fri Aug 31 07:46:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 07:46:23 2012] Source is confused with source 13
[Fri Aug 31 08:40:22 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 08:40:22 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Aug 31 08:40:22 2012] source mask rpix=2.3, npix_max = 30, mask sum = 21, frac = 0.679
[Fri Aug 31 08:40:22 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 9.92"
[Fri Aug 31 09:16:28 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_src31.ximg exists
[Fri Aug 31 09:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_src31.csv
[Fri Aug 31 09:16:28 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_src31_1.ximg exists
[Fri Aug 31 09:16:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_src31.csv
[Fri Aug 31 09:16:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 09:16:29 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Fri Aug 31 09:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Aug 31 09:16:29 2012] fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Fri Aug 31 09:16:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Fri Aug 31 09:16:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104861001_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 09:56:58 2012] Warning, spatial fit 31 centroid is now closest to src. 13
[Fri Aug 31 09:56:59 2012] Spatial fit model total counts = 148.476000, observed total counts = 151.000000
[Fri Aug 31 09:56:59 2012] Offset between fit and detection position for source 14 = 2.017436 pixels
[Fri Aug 31 09:56:59 2012] Warning, changing simple spatial fit ID from 31 to 34
[Fri Aug 31 09:56:59 2012] 143.662800 total counts/ 87.542300 bgd. counts: snr = 5.998084
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.017436 pixels
  Position = (336.7, 386.6) = 11 10 24.23 48 35 54.7
  Extent = 19.8 (13.5-39.6)" x 4.4 (3.3-6.0)", rotation angle = 18 (11-28) degrees
  Source counts = 56.1 +/- 12.0
  Background counts = 87.5
  Rate = 0.002 +/- 0.0004
[Fri Aug 31 09:56:59 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 09:56:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 09:56:59 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 09:56:59 2012] Source does appear to be extended
[Fri Aug 31 09:56:59 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.24
[Fri Aug 31 09:56:59 2012] Source is asymmetric
[Fri Aug 31 10:23:16 2012] XMMSAS src. selection expression = ellipse(29245.064000, 33582.818000, 1188.294034, 263.640608, 17.667700, X, Y)
[Fri Aug 31 10:23:16 2012] Writing source region out to fullrun_mos1_xmm0104861001_pi300-10000_pass1_cl_src14_src.reg
[Fri Aug 31 10:23:16 2012] Extracting stamp from image fullrun_mos1_xmm0104861001_pi300-10000_cl_sm2.00.img.gz, (268, 318) - (405, 455)
[Fri Aug 31 10:23:16 2012] XMMSAS bgd. selection expression = annulus(29245.064000, 33582.818000, 1980.490057, 3960.980114, X, Y) && !ellipse(31531.443298, 31989.191589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30235.735901, 37364.601074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25644.583400, 37698.723000, 503.496814, 503.496814, 0.000000, X, Y) && !ellipse(28377.035339, 37154.126558, 369.428617, 204.547677, 37.603498, X, Y) && !ellipse(26030.239000, 35850.919200, 473.379214, 473.379214, 0.000000, X, Y) && !ellipse(25019.178580, 30632.414200, 775.048822, 168.710405, 43.553000, X, Y) && !ellipse(28870.952606, 33711.344482, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Aug 31 10:23:16 2012] Writing fullrun_mos1_xmm0104861001_pi300-10000_pass1_cl_src14.gif
[Fri Aug 31 10:31:45 2012] Mean detx,y = (4611.58, 4395.08) 
[Fri Aug 31 10:31:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug 31 10:32:43 2012] grppha failed
[Fri Aug 31 10:32:43 2012] Setting source spectrum file to fullrun_mos1_xmm0104861001_pi300-10000_pass1_cl_src14_src.pi.gz
[Fri Aug 31 10:32:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0104861001_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Aug 31 10:34:58 2012] Not generating rmf since there are only 56 counts
[Fri Aug 31 10:34:58 2012] rmf not generated due to insufficient counts
[Fri Aug 31 10:50:04 2012] Updating aperture counts using extracted products
[Fri Aug 31 10:50:04 2012] Error reading totcts from fullrun_mos1_xmm0104861001_pi300-10000_pass1_cl_src14_src.pi.gz
[Fri Aug 31 10:50:04 2012] No arf file for this source, not re-computing flux
[Fri Aug 31 10:50:06 2012] Flag c found in src. 14 procflags, skipping spectral fitting
[Fri Aug 31 10:50:06 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug 31 10:50:07 2012] xmm0104861001/analysis//spectral/fullrun_mos1_xmm0104861001_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete