[Wed Jun 20 10:21:06 2012] Detection parameters:
  Position = (296.0, 323.8) = 20 3 19.27 -32 48 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.2 +/- 18.1
  Background counts = 23.7
  Rate = 0.01 +/- 0.0009

[Wed Jun 20 10:21:06 2012] Off-axis axis estimate = 1.85'
[Wed Jun 20 11:31:46 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 11:31:46 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Wed Jun 20 11:31:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.678
[Wed Jun 20 11:31:46 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.35"
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun 20 11:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src6.csv
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun 20 11:54:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src6.csv
[Wed Jun 20 11:54:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun 20 11:54:32 2012] Fit fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jun 20 11:54:49 2012] Spatial fit model total counts = 272.557000, observed total counts = 294.000000
[Wed Jun 20 11:54:49 2012] Offset between fit and detection position for source 3 = 0.057639 pixels
[Wed Jun 20 11:54:49 2012] 271.424000 total counts/ 177.251000 bgd. counts: snr = 7.073463
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.057639 pixels
  Position = (296.0, 323.7) = 20 3 19.26 -32 48 41.3
  Extent = 3.8 (3.0-4.7)", rotation angle = 0
  Source counts = 94.2 +/- 16.5
  Background counts = 177.3
  Rate = 0.004 +/- 0.0008
[Wed Jun 20 11:54:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 11:54:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 11:54:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 11:54:49 2012] Source does appear to be extended
[Wed Jun 20 11:54:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 12:59:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 12:59:34 2012] Initial guess for spatial extent in simple fitting = 3.77"
[Wed Jun 20 12:59:34 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.802
[Wed Jun 20 12:59:34 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 3.77"
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jun 20 13:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src6.csv
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jun 20 13:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src6.csv
[Wed Jun 20 13:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jun 20 13:20:13 2012] Fit fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Jun 20 13:20:24 2012] Spatial fit model total counts = 280.552000, observed total counts = 300.000000
[Wed Jun 20 13:20:24 2012] Offset between fit and detection position for source 3 = 0.010013 pixels
[Wed Jun 20 13:20:24 2012] 279.063400 total counts/ 186.790000 bgd. counts: snr = 6.751491
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.010013 pixels
  Position = (296.0, 323.7) = 20 3 19.27 -32 48 41.3
  Extent = 3.7 (2.9-4.5)", rotation angle = 0
  Source counts = 92.3 +/- 16.7
  Background counts = 186.8
  Rate = 0.004 +/- 0.0008
[Wed Jun 20 13:20:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 13:20:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 13:20:24 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 13:20:24 2012] Source does appear to be extended
[Wed Jun 20 13:20:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 14:18:41 2012] XMMSAS src. selection expression = ellipse(25704.345364, 28117.593000, 220.882806, 220.882806, 0.000000, X, Y)
[Wed Jun 20 14:18:41 2012] Writing source region out to fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 20 14:18:41 2012] Extracting stamp from image fullrun_mos2_xmm0104860601_pi300-10000_cl_sm2.00.img.gz, (283, 311) - (309, 336)
[Wed Jun 20 14:18:41 2012] XMMSAS bgd. selection expression = annulus(25704.345364, 28117.593000, 368.138011, 736.276021, X, Y) && !ellipse(27441.555400, 29139.224600, 1261.632036, 1261.632036, 0.000000, X, Y)
[Wed Jun 20 14:18:41 2012] Writing fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src3.gif
[Wed Jun 20 14:20:12 2012] Mean detx,y = (493.82, -3726.67) 
[Wed Jun 20 14:20:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 14:20:21 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 14:20:21 2012] Setting source spectrum file to fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 14:20:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 20 14:34:37 2012] Not generating rmf since there are only 92 counts
[Wed Jun 20 14:34:37 2012] rmf not generated due to insufficient counts
[Wed Jun 20 14:39:44 2012] Updating aperture counts using extracted products
[Wed Jun 20 14:39:44 2012] Error reading totcts from fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 20 14:39:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 14:39:44 2012] Using photon index=1.80, rate=0.00438, arf fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src3.arf
[Wed Jun 20 14:39:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 14:39:44 2012] Updating source flux to 5.9e-14
[Wed Jun 20 14:40:09 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting