[Wed Jun 20 10:21:06 2012] Detection parameters:
  Position = (282.1, 281.7) = 20 3 24.08 -32 51 44.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1704.4 +/- 50.4
  Background counts = 23.8
  Rate = 0.08 +/- 0.002

[Wed Jun 20 10:21:06 2012] Off-axis axis estimate = 1.69'
[Wed Jun 20 11:31:46 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 11:31:46 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jun 20 11:31:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.741
[Wed Jun 20 11:31:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 20 11:54:32 2012] Fit fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 20 11:54:32 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 20 11:54:32 2012] Fit fullrun_mos2_xmm0104860601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 20 11:54:49 2012] Spatial fit model total counts = 1600.370000, observed total counts = 1531.000000
[Wed Jun 20 11:54:49 2012] Offset between fit and detection position for source 2 = 0.266033 pixels
[Wed Jun 20 11:54:49 2012] 1596.239000 total counts/ 571.079000 bgd. counts: snr = 42.898643
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.266033 pixels
  Position = (281.9, 281.5) = 20 3 24.12 -32 51 45.0
  Extent = 5.1" x 4.3", rotation angle = 92
  Source counts = 1025.2 +/- 40.0
  Background counts = 571.1
  Rate = 0.05 +/- 0.002
[Wed Jun 20 11:54:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 11:54:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 11:54:49 2012] Assessing source extent using major
[Wed Jun 20 11:54:49 2012] Source does appear to be extended
[Wed Jun 20 11:54:49 2012] Computing asymmetry using major and minor axis, asym = 1.18
[Wed Jun 20 12:59:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 12:59:34 2012] Initial guess for spatial extent in simple fitting = 4.70"
[Wed Jun 20 12:59:34 2012] source mask rpix=1.1, npix_max = 9, mask sum = 10, frac = 1.002
[Wed Jun 20 12:59:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.70"
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 20 13:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 20 13:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src1.csv
[Wed Jun 20 13:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 20 13:20:13 2012] fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 20 13:20:13 2012] Fit fullrun_mos2_xmm0104860601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 20 13:20:24 2012] Spatial fit model total counts = 1642.150000, observed total counts = 1532.000000
[Wed Jun 20 13:20:24 2012] Offset between fit and detection position for source 2 = 0.092369 pixels
[Wed Jun 20 13:20:24 2012] 1646.183000 total counts/ 582.963000 bgd. counts: snr = 44.035471
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.092369 pixels
  Position = (282.0, 281.5) = 20 3 24.09 -32 51 45.1
  Extent = 4.7 (4.4-5.0)", rotation angle = 0
  Source counts = 1063.2 +/- 40.6
  Background counts = 583.0
  Rate = 0.05 +/- 0.002
[Wed Jun 20 13:20:24 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 13:20:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 13:20:24 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 13:20:24 2012] Source does appear to be extended
[Wed Jun 20 13:20:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 14:18:41 2012] Counts = 1063.220000, rescaling region sizes by 2.000000
[Wed Jun 20 14:18:41 2012] XMMSAS src. selection expression = ellipse(24488.224220, 24440.814400, 563.103616, 563.103616, 0.000000, X, Y)
[Wed Jun 20 14:18:41 2012] Writing source region out to fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2_src.reg
[Wed Jun 20 14:18:41 2012] Extracting stamp from image fullrun_mos2_xmm0104860601_pi300-10000_cl_sm2.00.img.gz, (250, 249) - (314, 314)
[Wed Jun 20 14:18:41 2012] XMMSAS bgd. selection expression = annulus(24488.224220, 24440.814400, 1877.012054, 3754.024108, X, Y) && !ellipse(21114.437800, 22457.160800, 364.297161, 364.297161, 0.000000, X, Y) && !ellipse(25704.345364, 28117.593000, 294.510408, 294.510408, 0.000000, X, Y) && !ellipse(27441.555400, 29139.224600, 1261.632036, 1261.632036, 0.000000, X, Y) && !ellipse(25797.839400, 20746.071600, 359.297610, 359.297610, 0.000000, X, Y)
[Wed Jun 20 14:18:41 2012] Writing fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2.gif
[Wed Jun 20 14:18:44 2012] Mean detx,y = (115.75, 118.57) 
[Wed Jun 20 14:18:45 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 14:18:58 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 14:18:58 2012] Setting source spectrum file to fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 20 14:18:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jun 20 14:39:44 2012] Updating aperture counts using extracted products
[Wed Jun 20 14:39:44 2012] Error reading totcts from fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jun 20 14:39:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 14:39:44 2012] Using photon index=1.80, rate=0.0505, arf fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2.arf
[Wed Jun 20 14:39:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 14:39:44 2012] Updating source flux to 5.3e-13
[Wed Jun 20 14:40:36 2012] Reading fit data from xmm0104860601/analysis//spectral/fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2_pl.csv
[Wed Jun 20 14:40:36 2012] Spectral fit parameter nH value = 6.24806e+20
[Wed Jun 20 14:40:36 2012] Spectral fit parameter PhoIndex value = 1.67207
[Wed Jun 20 14:40:36 2012] Failed to get F(0.3-8.0) from xmm0104860601/analysis//spectral/fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Jun 20 14:40:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 14:40:36 2012] Using Nh = 6.2e+20, photon index=1.67, rate=0.0505, arf fullrun_mos2_xmm0104860601_pi300-10000_pass1_cl_src2.arf
[Wed Jun 20 14:40:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 14:40:36 2012] Updating source flux to 6.1e-13