[Sun Jun 23 00:02:22 2013] Detection parameters:
  Position = (323.6, 345.2) = 12 21 28.88 28 7 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.3 +/- 14.3
  Background counts = 70.1
  Rate = 0.003 +/- 0.0004

[Sun Jun 23 00:02:22 2013] Off-axis axis estimate = 3.85'
[Sun Jun 23 00:05:41 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:05:41 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Jun 23 00:05:41 2013] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.025
[Sun Jun 23 00:05:41 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 8.35"
[Sun Jun 23 03:48:41 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src58.ximg exists
[Sun Jun 23 03:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src58.csv
[Sun Jun 23 03:48:41 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src58_1.ximg exists
[Sun Jun 23 03:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src58.csv
[Sun Jun 23 03:48:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:48:42 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sun Jun 23 03:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun Jun 23 03:48:42 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sun Jun 23 03:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sun Jun 23 03:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:33 2013] Source 60 is offset by -6.993291 and -6.593420 pixels which is larger than
2 X fitted extent = 1.428970 x 1.428970, not incorporating fit results
[Sun Jun 23 06:11:33 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:33 2013] Assessing source extent using major
[Sun Jun 23 06:11:33 2013] Source does appear to be extended
[Sun Jun 23 06:11:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 06:12:03 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:12:03 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Sun Jun 23 06:12:03 2013] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.025
[Sun Jun 23 06:12:03 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 8.35"
[Sun Jun 23 09:16:52 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src56.ximg exists
[Sun Jun 23 09:16:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src56.csv
[Sun Jun 23 09:16:52 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src56_1.ximg exists
[Sun Jun 23 09:16:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src56.csv
[Sun Jun 23 09:16:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:16:53 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Sun Jun 23 09:16:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src56.csv
[Sun Jun 23 09:16:53 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Sun Jun 23 09:16:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src56.csv
[Sun Jun 23 09:16:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:28:11 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 23.276200 pixels away
[Sun Jun 23 11:28:11 2013] Source 60 is offset by -6.099015 and -5.842454 pixels which is larger than
2 X fitted extent = 1.069186 x 1.069186, not incorporating fit results
[Sun Jun 23 11:28:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:11 2013] Assessing source extent using major
[Sun Jun 23 11:28:11 2013] Source does appear to be extended
[Sun Jun 23 11:28:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 11:28:39 2013] XMMSAS src. selection expression = ellipse(28103.521698, 29980.226501, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 11:28:39 2013] Writing source region out to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60_src.reg
[Sun Jun 23 11:28:39 2013] Extracting stamp from image fullrun_pn_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (286, 308) - (361, 383)
[Sun Jun 23 11:28:39 2013] XMMSAS bgd. selection expression = annulus(28103.521698, 29980.226501, 1087.500000, 2175.000000, X, Y) && !ellipse(26300.974460, 27932.595200, 434.564813, 434.564813, 0.000000, X, Y) && !ellipse(27727.011600, 31175.156840, 416.917612, 416.917612, 0.000000, X, Y) && !ellipse(28781.442200, 33559.468400, 2064.776059, 456.632813, 67.031100, X, Y) && !ellipse(29253.122200, 32354.294400, 1901.560055, 417.250412, 65.486500, X, Y) && !ellipse(29472.572200, 31830.683800, 1482.888043, 437.400013, 67.497700, X, Y) && !ellipse(29780.360720, 31056.092400, 1457.024042, 513.343215, 247.925000, X, Y) && !ellipse(27769.753000, 27586.604600, 945.032027, 412.055212, 309.088200, X, Y) && !ellipse(26842.603149, 27272.526733, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 11:28:39 2013] Writing fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60.gif
[Sun Jun 23 12:28:00 2013] Mean detx,y = (2396.85, -1590.19) 
[Sun Jun 23 12:28:05 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:28:35 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:28:36 2013] Setting source spectrum file to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun Jun 23 12:28:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sun Jun 23 13:56:01 2013] Not generating rmf since there are only 86 counts
[Sun Jun 23 13:56:01 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:35:04 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:04 2013] Total counts from fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 224.00
[Sun Jun 23 15:35:05 2013] Total counts from fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60_bgd.pi.gz = 1278.00
[Sun Jun 23 15:35:05 2013] Got source and background scale factors 1058607.000000, 6527851.000000
[Sun Jun 23 15:35:05 2013] User source parameters:
  Position = (323.6, 345.2) = 12 21 28.88 28 7 55.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 16.7 +/- 16.0
  Background aperture counts = 207.3
  Rate = 0.0005 +/- 0.0005

[Sun Jun 23 15:35:05 2013] Updating counts from extracted products
[Sun Jun 23 15:35:05 2013] Set source signif. to 16.75/14.40 = 1.16
[Sun Jun 23 15:35:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:11 2013] Using photon index=1.80, rate=0.000482, arf fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60.arf
[Sun Jun 23 15:35:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:11 2013] Updating source flux to 1.3e-15
[Sun Jun 23 15:35:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 15:36:18 2013] xmm0104860501/analysis//spectral/fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete