[Sun Jun 23 00:02:22 2013] Detection parameters:
  Position = (293.9, 424.9) = 12 21 38.64 28 13 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.4 +/- 17.0
  Background counts = 59.5
  Rate = 0.003 +/- 0.0008

[Sun Jun 23 00:02:22 2013] Off-axis axis estimate = 9.18'
[Sun Jun 23 00:05:41 2013] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:05:41 2013] Initial guess for spatial extent in simple fitting = 11.02"
[Sun Jun 23 00:05:41 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Sun Jun 23 00:05:41 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 11.02"
[Sun Jun 23 03:48:40 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src41.ximg exists
[Sun Jun 23 03:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src41.csv
[Sun Jun 23 03:48:40 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Jun 23 03:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src41.csv
[Sun Jun 23 03:48:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:48:42 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Jun 23 03:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jun 23 03:48:42 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Jun 23 03:48:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Jun 23 03:48:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:33 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.819501 pixels away
[Sun Jun 23 06:11:33 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:33 2013] Assessing source extent using major
[Sun Jun 23 06:11:33 2013] Source does appear to be extended
[Sun Jun 23 06:11:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 06:12:03 2013] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:12:03 2013] Initial guess for spatial extent in simple fitting = 11.02"
[Sun Jun 23 06:12:03 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.979
[Sun Jun 23 06:12:03 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 11.02"
[Sun Jun 23 09:16:52 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src40.ximg exists
[Sun Jun 23 09:16:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src40.csv
[Sun Jun 23 09:16:52 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src40_1.ximg exists
[Sun Jun 23 09:16:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src40.csv
[Sun Jun 23 09:16:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:16:53 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Sun Jun 23 09:16:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 23 09:16:53 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Sun Jun 23 09:16:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src40.csv
[Sun Jun 23 09:16:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:28:11 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 15.155691 pixels away
[Sun Jun 23 11:28:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:11 2013] Assessing source extent using major
[Sun Jun 23 11:28:11 2013] Source does appear to be extended
[Sun Jun 23 11:28:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 11:28:38 2013] XMMSAS src. selection expression = ellipse(25521.800415, 36921.168701, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 11:28:38 2013] Writing source region out to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43_src.reg
[Sun Jun 23 11:28:38 2013] Extracting stamp from image fullrun_pn_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (256, 387) - (331, 462)
[Sun Jun 23 11:28:38 2013] XMMSAS bgd. selection expression = annulus(25521.800415, 36921.168701, 1087.500000, 2175.000000, X, Y) && !ellipse(27351.097180, 37213.176000, 1682.896848, 1312.982438, 355.933510, X, Y) && !ellipse(25343.217834, 34661.170593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25629.015120, 41578.306000, 2509.120072, 460.580013, 248.132000, X, Y) && !ellipse(31037.034000, 39081.160000, 3639.712105, 3639.712105, 0.000000, X, Y) && !ellipse(25906.446600, 40872.534000, 2512.448072, 487.418414, 67.518300, X, Y) && !ellipse(26142.148000, 40296.852800, 2419.024070, 496.411214, 247.506000, X, Y) && !ellipse(26265.062800, 39992.063800, 2394.536069, 474.676014, 68.565000, X, Y) && !ellipse(29511.116000, 37674.996000, 1819.856052, 1819.856052, 0.000000, X, Y) && !ellipse(27951.612020, 35703.744940, 2065.856059, 381.769611, 67.637300, X, Y) && !ellipse(28266.322000, 34904.400000, 1633.976047, 524.076015, 69.943000, X, Y) && !ellipse(28510.074000, 34317.168992, 1621.472047, 392.574411, 248.691000, X, Y) && !ellipse(28781.442200, 33559.468400, 2064.776059, 456.632813, 67.031100, X, Y)
[Sun Jun 23 11:28:38 2013] Writing fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43.gif
[Sun Jun 23 12:13:44 2013] Mean detx,y = (2532.67, -8907.40) 
[Sun Jun 23 12:13:47 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 12:14:13 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 12:14:14 2013] Setting source spectrum file to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun Jun 23 12:14:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun Jun 23 13:31:38 2013] Not generating rmf since there are only 69 counts
[Sun Jun 23 13:31:38 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:34:59 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:34:59 2013] Total counts from fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 500.00
[Sun Jun 23 15:35:00 2013] Total counts from fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43_bgd.pi.gz = 1323.00
[Sun Jun 23 15:35:00 2013] Got source and background scale factors 1216538.000000, 5467980.000000
[Sun Jun 23 15:35:00 2013] User source parameters:
  Position = (293.9, 424.9) = 12 21 38.64 28 13 44.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 205.7 +/- 23.4
  Background aperture counts = 294.3
  Rate = 0.006 +/- 0.0007

[Sun Jun 23 15:35:00 2013] Updating counts from extracted products
[Sun Jun 23 15:35:00 2013] Set source signif. to 205.65/17.16 = 11.99
[Sun Jun 23 15:35:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:10 2013] Using photon index=1.80, rate=0.00592, arf fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43.arf
[Sun Jun 23 15:35:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:10 2013] Updating source flux to 2.6e-14
[Sun Jun 23 15:35:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 15:36:18 2013] xmm0104860501/analysis//spectral/fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete