[Sun Jun 23 00:02:21 2013] Detection parameters:
  Position = (190.7, 209.4) = 12 22 12.51 27 58 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.3 +/- 20.5
  Background counts = 52.1
  Rate = 0.005 +/- 0.0005

[Sun Jun 23 00:02:22 2013] Off-axis axis estimate = 10.13'
[Sun Jun 23 00:05:41 2013] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 00:05:41 2013] Initial guess for spatial extent in simple fitting = 11.50"
[Sun Jun 23 00:05:41 2013] source mask rpix=2.6, npix_max = 39, mask sum = 33, frac = 0.835
[Sun Jun 23 00:05:41 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 11.50"
[Sun Jun 23 03:48:40 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun 23 03:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src28.csv
[Sun Jun 23 03:48:40 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun 23 03:48:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src28.csv
[Sun Jun 23 03:48:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 03:48:41 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun 23 03:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 03:48:41 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun 23 03:48:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 03:48:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:33 2013] Warning, spatial fit 28 centroid is now closest to src. 69
[Sun Jun 23 06:11:33 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:33 2013] Assessing source extent using major
[Sun Jun 23 06:11:33 2013] Source does appear to be extended
[Sun Jun 23 06:11:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 06:12:03 2013] Using EEF radius (= 11.50 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 06:12:03 2013] Initial guess for spatial extent in simple fitting = 11.50"
[Sun Jun 23 06:12:03 2013] source mask rpix=2.6, npix_max = 39, mask sum = 33, frac = 0.835
[Sun Jun 23 06:12:03 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 11.50"
[Sun Jun 23 09:16:52 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun 23 09:16:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src27.csv
[Sun Jun 23 09:16:52 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun 23 09:16:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src27.csv
[Sun Jun 23 09:16:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 09:16:53 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun 23 09:16:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun 23 09:16:53 2013] fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun 23 09:16:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sun Jun 23 09:16:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:28:11 2013] Warning, spatial fit 27 centroid is now closest to src. 69
[Sun Jun 23 11:28:11 2013] Source 30 is offset by -4.625803 and -0.186855 pixels which is larger than
2 X fitted extent = 1.317402 x 1.317402, not incorporating fit results
[Sun Jun 23 11:28:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:11 2013] Assessing source extent using major
[Sun Jun 23 11:28:11 2013] Source does appear to be extended
[Sun Jun 23 11:28:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 11:28:38 2013] XMMSAS src. selection expression = ellipse(16545.113174, 18165.153641, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 11:28:38 2013] Writing source region out to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30_src.reg
[Sun Jun 23 11:28:38 2013] Extracting stamp from image fullrun_pn_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (153, 172) - (228, 247)
[Sun Jun 23 11:28:38 2013] XMMSAS bgd. selection expression = annulus(16545.113174, 18165.153641, 1087.500000, 2175.000000, X, Y) && !ellipse(17579.228500, 17174.643188, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 11:28:38 2013] Writing fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30.gif
[Sun Jun 23 11:59:07 2013] Mean detx,y = (-12548.33, 5299.68) 
[Sun Jun 23 11:59:10 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 11:59:37 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 11:59:37 2013] Setting source spectrum file to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun 23 11:59:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jun 23 13:12:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 13:12:19 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:34:55 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:34:55 2013] Total counts from fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 322.00
[Sun Jun 23 15:34:55 2013] Total counts from fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30_bgd.pi.gz = 1285.00
[Sun Jun 23 15:34:55 2013] Got source and background scale factors 1150436.000000, 8927689.000000
[Sun Jun 23 15:34:55 2013] User source parameters:
  Position = (190.7, 209.4) = 12 22 12.51 27 58 6.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 156.4 +/- 19.0
  Background aperture counts = 165.6
  Rate = 0.005 +/- 0.0005

[Sun Jun 23 15:34:55 2013] Updating counts from extracted products
[Sun Jun 23 15:34:55 2013] Set source signif. to 156.41/12.87 = 12.16
[Sun Jun 23 15:35:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:10 2013] Using photon index=1.80, rate=0.00451, arf fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30.arf
[Sun Jun 23 15:35:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:10 2013] Updating source flux to 3.1e-14
[Sun Jun 23 15:35:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 15:36:18 2013] xmm0104860501/analysis//spectral/fullrun_pn_xmm0104860501_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete