[Sun Jun 23 00:03:16 2013] Detection parameters:
  Position = (229.0, 288.7) = 12 21 59.95 28 3 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.4 +/- 10.4
  Background counts = 23.4
  Rate = 0.002 +/- 0.0004

[Sun Jun 23 00:03:17 2013] Off-axis axis estimate = 5.08'
[Sun Jun 23 04:52:30 2013] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 04:52:30 2013] Initial guess for spatial extent in simple fitting = 8.97"
[Sun Jun 23 04:52:30 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.143
[Sun Jun 23 04:52:30 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.97"
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src28.csv
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src28.csv
[Sun Jun 23 06:11:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 06:11:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:46 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 11.908181 pixels away
[Sun Jun 23 06:11:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:47 2013] Assessing source extent using major
[Sun Jun 23 06:11:47 2013] Source does appear to be extended
[Sun Jun 23 06:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:35:38 2013] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:35:38 2013] Initial guess for spatial extent in simple fitting = 8.97"
[Sun Jun 23 10:35:38 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.143
[Sun Jun 23 10:35:38 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 8.97"
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src27.ximg exists
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Jun 23 11:27:56 2013] Fit fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src27 appears to have run properly
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Jun 23 11:27:56 2013] Fit fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Jun 23 11:28:23 2013] Spatial fit model total counts = 164.551000, observed total counts = 154.000000
[Sun Jun 23 11:28:23 2013] Offset between fit and detection position for source 30 = 0.331247 pixels
[Sun Jun 23 11:28:23 2013] 163.712700 total counts/ 130.613000 bgd. counts: snr = 2.896215
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.331247 pixels
  Position = (228.9, 288.4) = 12 22 0.01 28 3 49.7
  Extent = 8.5 (5.4-13.0)" x 3.2 (3.1-3.2)", rotation angle = 92 (76-115) degrees
  Source counts = 33.1 +/- 12.8
  Background counts = 130.6
  Rate = 0.0008 +/- 0.0003
[Sun Jun 23 11:28:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:23 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:28:23 2013] Source does appear to be extended
[Sun Jun 23 11:28:23 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.68
[Sun Jun 23 11:28:23 2013] Source is asymmetric
[Sun Jun 23 14:41:04 2013] XMMSAS src. selection expression = ellipse(19864.915900, 25043.545400, 511.532415, 189.423605, 91.676303, X, Y)
[Sun Jun 23 14:41:04 2013] Writing source region out to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30_src.reg
[Sun Jun 23 14:41:04 2013] Extracting stamp from image fullrun_mos2_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (199, 259) - (258, 318)
[Sun Jun 23 14:41:04 2013] XMMSAS bgd. selection expression = annulus(19864.915900, 25043.545400, 852.554025, 1705.108049, X, Y)
[Sun Jun 23 14:41:04 2013] Writing fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30.gif
[Sun Jun 23 14:54:57 2013] Mean detx,y = (7167.57, -281.43) 
[Sun Jun 23 14:54:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:55:16 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:55:16 2013] Setting source spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Jun 23 14:55:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Jun 23 15:32:18 2013] Not generating rmf since there are only 33 counts
[Sun Jun 23 15:32:18 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:35:27 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:27 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 54.00
[Sun Jun 23 15:35:27 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30_bgd.pi.gz = 465.00
[Sun Jun 23 15:35:27 2013] Got source and background scale factors 305600.000000, 6289084.000000
[Sun Jun 23 15:35:27 2013] User source parameters:
  Position = (228.9, 288.4) = 12 22 0.01 28 3 49.7
  Extent = 8.5 (5.4-13.0)" x 3.2 (3.1-3.2)", rotation angle = 92 (76-115) degrees
  Source aperture counts = 31.4 +/- 8.4
  Background aperture counts = 22.6
  Rate = 0.0008 +/- 0.0002

[Sun Jun 23 15:35:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:31 2013] Using photon index=1.80, rate=0.000844, arf fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30.arf
[Sun Jun 23 15:35:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:31 2013] Updating source flux to 1.8e-14
[Sun Jun 23 15:35:41 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 15:35:51 2013] xmm0104860501/analysis//spectral/fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete