[Sun Jun 23 00:03:16 2013] Detection parameters:
  Position = (472.9, 298.1) = 12 20 39.80 28 4 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.3 +/- 9.1
  Background counts = 19.7
  Rate = 0.001 +/- 0.0002

[Sun Jun 23 00:03:17 2013] Off-axis axis estimate = 12.65'
[Sun Jun 23 04:52:30 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 04:52:30 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Sun Jun 23 04:52:30 2013] source mask rpix=2.9, npix_max = 47, mask sum = 39, frac = 0.828
[Sun Jun 23 04:52:30 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 12.75"
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src39.csv
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src39.csv
[Sun Jun 23 06:11:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sun Jun 23 06:11:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:47 2013] Spatial fit model total counts = 166.957000, observed total counts = 110.000000
[Sun Jun 23 06:11:47 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 06:11:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:47 2013] Assessing source extent using major
[Sun Jun 23 06:11:47 2013] Source does appear to be extended
[Sun Jun 23 06:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:35:38 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:35:38 2013] Initial guess for spatial extent in simple fitting = 12.75"
[Sun Jun 23 10:35:38 2013] source mask rpix=2.9, npix_max = 47, mask sum = 39, frac = 0.828
[Sun Jun 23 10:35:38 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 12.75"
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src36.ximg exists
[Sun Jun 23 11:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src36.csv
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun Jun 23 11:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src36.csv
[Sun Jun 23 11:27:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:27:57 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun Jun 23 11:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sun Jun 23 11:27:57 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Jun 23 11:27:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sun Jun 23 11:27:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:28:23 2013] Spatial fit model total counts = 166.038000, observed total counts = 110.000000
[Sun Jun 23 11:28:23 2013] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun 23 11:28:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:23 2013] Assessing source extent using major
[Sun Jun 23 11:28:23 2013] Source does appear to be extended
[Sun Jun 23 11:28:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:41:04 2013] XMMSAS src. selection expression = ellipse(41095.801361, 25888.818390, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:41:04 2013] Writing source region out to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29_src.reg
[Sun Jun 23 14:41:04 2013] Extracting stamp from image fullrun_mos2_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (435, 261) - (510, 336)
[Sun Jun 23 14:41:04 2013] XMMSAS bgd. selection expression = annulus(41095.801361, 25888.818390, 1087.500000, 2175.000000, X, Y)
[Sun Jun 23 14:41:04 2013] Writing fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29.gif
[Sun Jun 23 14:57:51 2013] Mean detx,y = (-12845.17, -7079.29) 
[Sun Jun 23 14:57:52 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:58:17 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:58:17 2013] Setting source spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jun 23 14:58:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Jun 23 15:33:15 2013] Not generating rmf since there are only 40 counts
[Sun Jun 23 15:33:15 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:35:29 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:29 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 76.00
[Sun Jun 23 15:35:29 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29_bgd.pi.gz = 458.00
[Sun Jun 23 15:35:29 2013] Got source and background scale factors 794520.000000, 7769768.000000
[Sun Jun 23 15:35:29 2013] User source parameters:
  Position = (472.9, 298.1) = 12 20 39.80 28 4 33.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.2 +/- 9.8
  Background aperture counts = 46.8
  Rate = 0.0007 +/- 0.0002

[Sun Jun 23 15:35:29 2013] Updating counts from extracted products
[Sun Jun 23 15:35:29 2013] Set source signif. to 29.17/6.84 = 4.26
[Sun Jun 23 15:35:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:31 2013] Using photon index=1.80, rate=0.000744, arf fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29.arf
[Sun Jun 23 15:35:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:31 2013] Updating source flux to 1.9e-14
[Sun Jun 23 15:35:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 15:35:51 2013] xmm0104860501/analysis//spectral/fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete