[Sun Jun 23 00:03:16 2013] Detection parameters:
  Position = (360.9, 376.6) = 12 21 16.61 28 10 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.9 +/- 16.6
  Background counts = 27.9
  Rate = 0.006 +/- 0.0006

[Sun Jun 23 00:03:17 2013] Off-axis axis estimate = 7.25'
[Sun Jun 23 04:52:30 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 04:52:30 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sun Jun 23 04:52:30 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.854
[Sun Jun 23 04:52:30 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.06"
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src6.csv
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src6.csv
[Sun Jun 23 06:11:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Sun Jun 23 06:11:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:46 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 12.765224 pixels away
[Sun Jun 23 06:11:46 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.704551 pixels away
[Sun Jun 23 06:11:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:47 2013] Assessing source extent using major
[Sun Jun 23 06:11:47 2013] Source does appear to be extended
[Sun Jun 23 06:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:35:38 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:35:38 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Sun Jun 23 10:35:38 2013] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.854
[Sun Jun 23 10:35:38 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.06"
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src6.ximg exists
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Jun 23 11:27:56 2013] Fit fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src6 appears to have run properly
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Jun 23 11:27:56 2013] Fit fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Jun 23 11:28:22 2013] Spatial fit model total counts = 255.323000, observed total counts = 254.000000
[Sun Jun 23 11:28:22 2013] Offset between fit and detection position for source 17 = 0.306879 pixels
[Sun Jun 23 11:28:22 2013] 249.789000 total counts/ 138.538000 bgd. counts: snr = 9.451908
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.306879 pixels
  Position = (360.6, 376.7) = 12 21 16.71 28 10 13.7
  Extent = 5.4 (4.4-6.7)", rotation angle = 0
  Source counts = 111.3 +/- 15.8
  Background counts = 138.5
  Rate = 0.003 +/- 0.0004
[Sun Jun 23 11:28:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:23 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:28:23 2013] Source does appear to be extended
[Sun Jun 23 11:28:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:41:04 2013] XMMSAS src. selection expression = ellipse(31321.358800, 32722.656000, 325.576809, 325.576809, 0.000000, X, Y)
[Sun Jun 23 14:41:04 2013] Writing source region out to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17_src.reg
[Sun Jun 23 14:41:04 2013] Extracting stamp from image fullrun_mos2_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (342, 358) - (379, 395)
[Sun Jun 23 14:41:04 2013] XMMSAS bgd. selection expression = annulus(31321.358800, 32722.656000, 542.628016, 1085.256031, X, Y) && !ellipse(32915.723800, 32537.457400, 1092.368031, 502.277614, 36.635900, X, Y)
[Sun Jun 23 14:41:04 2013] Writing fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17.gif
[Sun Jun 23 14:47:42 2013] Mean detx,y = (-6278.03, 2806.28) 
[Sun Jun 23 14:47:43 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:47:59 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:47:59 2013] Setting source spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 23 14:47:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 23 15:35:22 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:22 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 132.00
[Sun Jun 23 15:35:22 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17_bgd.pi.gz = 184.00
[Sun Jun 23 15:35:22 2013] Got source and background scale factors 308896.000000, 2449180.000000
[Sun Jun 23 15:35:22 2013] User source parameters:
  Position = (360.6, 376.7) = 12 21 16.71 28 10 13.7
  Extent = 5.4 (4.4-6.7)", rotation angle = 0
  Source aperture counts = 108.8 +/- 12.5
  Background aperture counts = 23.2
  Rate = 0.003 +/- 0.0003

[Sun Jun 23 15:35:30 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:30 2013] Using photon index=1.80, rate=0.00284, arf fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17.arf
[Sun Jun 23 15:35:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:30 2013] Updating source flux to 5.1e-14
[Sun Jun 23 15:35:51 2013] xmm0104860501/analysis//spectral/fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete