[Sun Jun 23 00:03:16 2013] Detection parameters:
  Position = (345.2, 420.0) = 12 21 21.76 28 13 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.3 +/- 14.0
  Background counts = 18.9
  Rate = 0.002 +/- 0.0003

[Sun Jun 23 00:03:17 2013] Off-axis axis estimate = 9.44'
[Sun Jun 23 04:52:30 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 04:52:30 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Sun Jun 23 04:52:30 2013] source mask rpix=2.6, npix_max = 37, mask sum = 28, frac = 0.746
[Sun Jun 23 04:52:30 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.15"
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src19.csv
[Sun Jun 23 06:11:11 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 23 06:11:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src19.csv
[Sun Jun 23 06:11:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 23 06:11:12 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 23 06:11:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 23 06:11:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:46 2013] Warning, spatial fit 19 centroid is now closest to src. 16
[Sun Jun 23 06:11:47 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:47 2013] Assessing source extent using major
[Sun Jun 23 06:11:47 2013] Source does appear to be extended
[Sun Jun 23 06:11:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 10:35:38 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 10:35:38 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Sun Jun 23 10:35:38 2013] source mask rpix=2.6, npix_max = 37, mask sum = 28, frac = 0.746
[Sun Jun 23 10:35:38 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 11.15"
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src19.ximg exists
[Sun Jun 23 11:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src19.csv
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sun Jun 23 11:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src19.csv
[Sun Jun 23 11:27:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sun Jun 23 11:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 23 11:27:56 2013] fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sun Jun 23 11:27:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sun Jun 23 11:27:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:28:23 2013] Warning, spatial fit 19 centroid is now closest to src. 16
[Sun Jun 23 11:28:23 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:23 2013] Assessing source extent using major
[Sun Jun 23 11:28:23 2013] Source does appear to be extended
[Sun Jun 23 11:28:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:41:04 2013] XMMSAS src. selection expression = ellipse(29984.461273, 36487.185577, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:41:04 2013] Writing source region out to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14_src.reg
[Sun Jun 23 14:41:04 2013] Extracting stamp from image fullrun_mos2_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (308, 382) - (383, 457)
[Sun Jun 23 14:41:04 2013] XMMSAS bgd. selection expression = annulus(29984.461273, 36487.185577, 1087.500000, 2175.000000, X, Y) && !ellipse(27341.436140, 37205.539800, 2126.181661, 1208.138435, 357.617930, X, Y) && !ellipse(28642.784698, 36203.036377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32592.560272, 37651.280518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30516.205231, 39274.698181, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 14:41:04 2013] Writing fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14.gif
[Sun Jun 23 14:52:11 2013] Mean detx,y = (-6360.70, 6889.37) 
[Sun Jun 23 14:52:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:52:33 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:52:33 2013] Setting source spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Jun 23 14:52:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Jun 23 15:31:25 2013] Not generating rmf since there are only 97 counts
[Sun Jun 23 15:31:25 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:35:25 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:25 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 178.00
[Sun Jun 23 15:35:25 2013] Total counts from fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14_bgd.pi.gz = 629.00
[Sun Jun 23 15:35:25 2013] Got source and background scale factors 944002.000000, 7506592.000000
[Sun Jun 23 15:35:25 2013] User source parameters:
  Position = (345.2, 420.0) = 12 21 21.76 28 13 17.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 98.9 +/- 14.4
  Background aperture counts = 79.1
  Rate = 0.003 +/- 0.0004

[Sun Jun 23 15:35:25 2013] Updating counts from extracted products
[Sun Jun 23 15:35:25 2013] Set source signif. to 98.90/8.89 = 11.12
[Sun Jun 23 15:35:30 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:30 2013] Using photon index=1.80, rate=0.00252, arf fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14.arf
[Sun Jun 23 15:35:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:30 2013] Updating source flux to 6.1e-14
[Sun Jun 23 15:35:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 15:35:51 2013] xmm0104860501/analysis//spectral/fullrun_mos2_xmm0104860501_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete