[Sun Jun 23 00:02:47 2013] Detection parameters:
  Position = (291.9, 399.9) = 12 21 39.31 28 11 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 285.8 +/- 21.4
  Background counts = 23.3
  Rate = 0.01 +/- 0.0008

[Sun Jun 23 00:02:48 2013] Off-axis axis estimate = 7.37'
[Sun Jun 23 03:48:42 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:48:42 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Sun Jun 23 03:48:42 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.783
[Sun Jun 23 03:48:42 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.11"
[Sun Jun 23 04:52:29 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jun 23 04:52:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 04:52:29 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jun 23 04:52:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src3.csv
[Sun Jun 23 04:52:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jun 23 04:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jun 23 04:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Jun 23 04:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:40 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.464955 pixels away
[Sun Jun 23 06:11:40 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:40 2013] Assessing source extent using major
[Sun Jun 23 06:11:40 2013] Source does appear to be extended
[Sun Jun 23 06:11:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 09:16:54 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:16:54 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Sun Jun 23 09:16:54 2013] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.783
[Sun Jun 23 09:16:54 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.11"
[Sun Jun 23 10:35:37 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jun 23 10:35:37 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jun 23 10:35:37 2013] Fit fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jun 23 10:35:38 2013] Fit fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jun 23 11:28:16 2013] Spatial fit model total counts = 393.857000, observed total counts = 366.000000
[Sun Jun 23 11:28:16 2013] Offset between fit and detection position for source 6 = 0.583318 pixels
[Sun Jun 23 11:28:16 2013] 392.500000 total counts/ 256.090000 bgd. counts: snr = 8.524127
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.583318 pixels
  Position = (292.1, 399.3) = 12 21 39.24 28 11 52.3
  Extent = 4.3 (3.6-5.2)", rotation angle = 0
  Source counts = 136.4 +/- 19.8
  Background counts = 256.1
  Rate = 0.004 +/- 0.0005
[Sun Jun 23 11:28:16 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:16 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:28:16 2013] Source does appear to be extended
[Sun Jun 23 11:28:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:06:20 2013] XMMSAS src. selection expression = ellipse(25362.844400, 34693.782400, 256.813207, 256.813207, 0.000000, X, Y)
[Sun Jun 23 14:06:20 2013] Writing source region out to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6_src.reg
[Sun Jun 23 14:06:20 2013] Extracting stamp from image fullrun_mos1_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (277, 385) - (307, 414)
[Sun Jun 23 14:06:20 2013] XMMSAS bgd. selection expression = annulus(25362.844400, 34693.782400, 428.022012, 856.044025, X, Y)
[Sun Jun 23 14:06:20 2013] Writing fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6.gif
[Sun Jun 23 14:09:05 2013] Mean detx,y = (6976.37, 1277.72) 
[Sun Jun 23 14:09:06 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:09:20 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:09:21 2013] Setting source spectrum file to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jun 23 14:09:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jun 23 15:35:12 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:12 2013] Total counts from fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 183.00
[Sun Jun 23 15:35:12 2013] Total counts from fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6_bgd.pi.gz = 154.00
[Sun Jun 23 15:35:12 2013] Got source and background scale factors 171632.000000, 1450486.000000
[Sun Jun 23 15:35:12 2013] User source parameters:
  Position = (292.1, 399.3) = 12 21 39.24 28 11 52.3
  Extent = 4.3 (3.6-5.2)", rotation angle = 0
  Source aperture counts = 164.8 +/- 14.6
  Background aperture counts = 18.2
  Rate = 0.004 +/- 0.0004

[Sun Jun 23 15:35:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:19 2013] Using photon index=1.80, rate=0.0035, arf fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6.arf
[Sun Jun 23 15:35:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:19 2013] Updating source flux to 6.6e-14
[Sun Jun 23 15:35:41 2013] xmm0104860501/analysis//spectral/fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete