[Sun Jun 23 00:02:47 2013] Detection parameters:
  Position = (306.5, 425.5) = 12 21 34.50 28 13 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.1 +/- 22.3
  Background counts = 23.8
  Rate = 0.007 +/- 0.001

[Sun Jun 23 00:02:48 2013] Off-axis axis estimate = 9.23'
[Sun Jun 23 03:48:42 2013] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:48:42 2013] Initial guess for spatial extent in simple fitting = 11.04"
[Sun Jun 23 03:48:42 2013] source mask rpix=2.5, npix_max = 36, mask sum = 38, frac = 1.029
[Sun Jun 23 03:48:42 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.04"
[Sun Jun 23 04:52:29 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src5.ximg exists
[Sun Jun 23 04:52:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 04:52:29 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Jun 23 04:52:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src5.csv
[Sun Jun 23 04:52:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Jun 23 04:52:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Jun 23 04:52:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Jun 23 04:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:40 2013] Source 4 is offset by 2.243744 and 7.280671 pixels which is larger than
2 X fitted extent = 1.284326 x 1.284326, not incorporating fit results
[Sun Jun 23 06:11:40 2013] Warning, spatial fit 5 centroid is now closest to src. 2
[Sun Jun 23 06:11:40 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:40 2013] Assessing source extent using major
[Sun Jun 23 06:11:40 2013] Source does appear to be extended
[Sun Jun 23 06:11:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 09:16:54 2013] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:16:54 2013] Initial guess for spatial extent in simple fitting = 11.04"
[Sun Jun 23 09:16:54 2013] source mask rpix=2.5, npix_max = 36, mask sum = 38, frac = 1.029
[Sun Jun 23 09:16:54 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 11.04"
[Sun Jun 23 10:35:37 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src5.ximg exists
[Sun Jun 23 10:35:37 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun Jun 23 10:35:37 2013] Fit fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src5 appears to have run properly
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun Jun 23 10:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun Jun 23 10:35:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sun Jun 23 10:35:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 11:28:16 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 16.744174 pixels away
[Sun Jun 23 11:28:16 2013] Warning, spatial fit 5 centroid is now closest to src. 2
[Sun Jun 23 11:28:16 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:16 2013] Assessing source extent using major
[Sun Jun 23 11:28:16 2013] Source does appear to be extended
[Sun Jun 23 11:28:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 23 14:06:20 2013] XMMSAS src. selection expression = ellipse(26614.315765, 36970.528351, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 23 14:06:20 2013] Writing source region out to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4_src.reg
[Sun Jun 23 14:06:20 2013] Extracting stamp from image fullrun_mos1_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (269, 388) - (344, 463)
[Sun Jun 23 14:06:20 2013] XMMSAS bgd. selection expression = annulus(26614.315765, 36970.528351, 1087.500000, 2175.000000, X, Y) && !ellipse(27457.022000, 37161.233400, 943.936027, 469.275214, 15.626900, X, Y) && !ellipse(25362.844400, 34693.782400, 342.417610, 342.417610, 0.000000, X, Y) && !ellipse(28630.454742, 37009.947571, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 23 14:06:20 2013] Writing fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4.gif
[Sun Jun 23 14:09:38 2013] Mean detx,y = (8679.29, 3706.82) 
[Sun Jun 23 14:09:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:09:59 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:09:59 2013] Setting source spectrum file to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Jun 23 14:09:59 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Jun 23 14:34:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 23 14:34:33 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:35:12 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:12 2013] Total counts from fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 3778.00
[Sun Jun 23 15:35:12 2013] Total counts from fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1567.00
[Sun Jun 23 15:35:13 2013] Got source and background scale factors 1197428.000000, 8960536.000000
[Sun Jun 23 15:35:13 2013] User source parameters:
  Position = (306.5, 425.5) = 12 21 34.50 28 13 51.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 3568.6 +/- 62.5
  Background aperture counts = 209.4
  Rate = 0.09 +/- 0.002

[Sun Jun 23 15:35:13 2013] Updating counts from extracted products
[Sun Jun 23 15:35:13 2013] Set source signif. to 3568.60/14.47 = 246.61
[Sun Jun 23 15:35:19 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:19 2013] Using photon index=1.80, rate=0.0916, arf fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4.arf
[Sun Jun 23 15:35:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:19 2013] Updating source flux to 1.7e-12
[Sun Jun 23 15:35:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 23 15:35:41 2013] xmm0104860501/analysis//spectral/fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete