[Sun Jun 23 00:02:48 2013] Detection parameters:
  Position = (358.1, 302.7) = 12 21 17.53 28 4 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.4 +/- 12.1
  Background counts = 25.8
  Rate = 0.002 +/- 0.0003

[Sun Jun 23 00:02:48 2013] Off-axis axis estimate = 4.34'
[Sun Jun 23 03:48:42 2013] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sun Jun 23 03:48:42 2013] Initial guess for spatial extent in simple fitting = 8.60"
[Sun Jun 23 03:48:42 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Sun Jun 23 03:48:42 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 8.60"
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src28.ximg exists
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Jun 23 04:52:30 2013] Fit fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_src28 appears to have run properly
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Jun 23 04:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 04:52:30 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Jun 23 04:52:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Jun 23 04:52:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860501_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 23 06:11:40 2013] Spatial fit model total counts = 175.978000, observed total counts = 176.000000
[Sun Jun 23 06:11:40 2013] Offset between fit and detection position for source 33 = 0.298764 pixels
[Sun Jun 23 06:11:40 2013] 176.286500 total counts/ 139.309000 bgd. counts: snr = 3.132910
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.298764 pixels
  Position = (357.8, 302.7) = 12 21 17.63 28 4 51.8
  Extent = 7.5 (5.0-11.6)" x 2.9 (2.1-5.2)", rotation angle = 316 (300-332) degrees
  Source counts = 37.0 +/- 13.3
  Background counts = 139.3
  Rate = 0.0009 +/- 0.0003
[Sun Jun 23 06:11:40 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 06:11:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 06:11:40 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 06:11:40 2013] Source does appear to be extended
[Sun Jun 23 06:11:40 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Sun Jun 23 09:16:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 23 09:16:54 2013] Initial guess for spatial extent in simple fitting = 5.18"
[Sun Jun 23 09:16:54 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.050
[Sun Jun 23 09:16:54 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 5.18"
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src28.ximg exists
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun Jun 23 10:35:38 2013] Fit fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_src28 appears to have run properly
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun Jun 23 10:35:38 2013] fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Jun 23 10:35:38 2013] Fit fullrun_mos1_xmm0104860501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Jun 23 11:28:16 2013] Spatial fit model total counts = 172.644000, observed total counts = 173.000000
[Sun Jun 23 11:28:16 2013] Offset between fit and detection position for source 33 = 0.048847 pixels
[Sun Jun 23 11:28:16 2013] 171.747300 total counts/ 134.621000 bgd. counts: snr = 3.199818
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.048847 pixels
  Position = (357.8, 302.6) = 12 21 17.64 28 4 51.6
  Extent = 7.3 (4.9-10.4)" x 3.0 (1.9-5.1)", rotation angle = 316 (292-333) degrees
  Source counts = 37.1 +/- 13.1
  Background counts = 134.6
  Rate = 0.001 +/- 0.0003
[Sun Jun 23 11:28:16 2013] Vigneting correction estimate = 1.000000
[Sun Jun 23 11:28:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 23 11:28:16 2013] Assessing source extent using major axis lower bound
[Sun Jun 23 11:28:16 2013] Source does appear to be extended
[Sun Jun 23 11:28:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Sun Jun 23 14:06:21 2013] XMMSAS src. selection expression = ellipse(31079.402740, 26281.845400, 440.995813, 182.805605, 315.733023, X, Y)
[Sun Jun 23 14:06:21 2013] Writing source region out to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33_src.reg
[Sun Jun 23 14:06:21 2013] Extracting stamp from image fullrun_mos1_xmm0104860501_pi300-10000_cl_sm2.00.img.gz, (332, 277) - (383, 328)
[Sun Jun 23 14:06:21 2013] XMMSAS bgd. selection expression = annulus(31079.402740, 26281.845400, 734.993021, 1469.986042, X, Y) && !ellipse(29383.485000, 25440.823200, 477.716014, 371.630411, 332.150524, X, Y)
[Sun Jun 23 14:06:21 2013] Writing fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33.gif
[Sun Jun 23 14:18:17 2013] Mean detx,y = (-2901.37, 3582.94) 
[Sun Jun 23 14:18:19 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 23 14:18:36 2013] Binned source spectrum to 10 counts/bin
[Sun Jun 23 14:18:37 2013] Setting source spectrum file to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sun Jun 23 14:18:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sun Jun 23 14:40:06 2013] Not generating rmf since there are only 37 counts
[Sun Jun 23 14:40:06 2013] rmf not generated due to insufficient counts
[Sun Jun 23 15:35:18 2013] Updating aperture counts using extracted products
[Sun Jun 23 15:35:18 2013] Total counts from fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 51.00
[Sun Jun 23 15:35:18 2013] Total counts from fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33_bgd.pi.gz = 409.00
[Sun Jun 23 15:35:18 2013] Got source and background scale factors 251200.000000, 5083120.000000
[Sun Jun 23 15:35:18 2013] User source parameters:
  Position = (357.8, 302.6) = 12 21 17.64 28 4 51.6
  Extent = 7.3 (4.9-10.4)" x 3.0 (1.9-5.1)", rotation angle = 316 (292-333) degrees
  Source aperture counts = 30.8 +/- 8.2
  Background aperture counts = 20.2
  Rate = 0.0008 +/- 0.0002

[Sun Jun 23 15:35:20 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 23 15:35:20 2013] Using photon index=1.80, rate=0.000953, arf fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33.arf
[Sun Jun 23 15:35:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 23 15:35:20 2013] Updating source flux to 1.6e-14
[Sun Jun 23 15:35:34 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 23 15:35:41 2013] xmm0104860501/analysis//spectral/fullrun_mos1_xmm0104860501_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete