[Tue Jul 24 10:11:34 2012] Detection parameters:
  Position = (299.5, 323.1) = 4 40 17.22 -43 33 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8733.3 +/- 109.9
  Background counts = 9.6
  Rate = 1 +/- 0.01

[Tue Jul 24 10:11:34 2012] Off-axis axis estimate = 1.79'
[Tue Jul 24 10:13:39 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 10:13:39 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Jul 24 10:13:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.049
[Tue Jul 24 10:13:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Tue Jul 24 11:02:19 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 24 11:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 11:02:19 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 24 11:02:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 11:02:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 11:02:19 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 24 11:02:19 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 24 11:02:19 2012] Fit fullrun_pn_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 24 11:44:41 2012] Spatial fit model total counts = 8035.710000, observed total counts = 7866.000000
[Tue Jul 24 11:44:41 2012] Offset between fit and detection position for source 1 = 0.086915 pixels
[Tue Jul 24 11:44:41 2012] 8061.790000 total counts/ 1806.910000 bgd. counts: snr = 147.146766
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.086915 pixels
  Position = (299.4, 323.1) = 4 40 17.25 -43 33 7.7
  Extent = 5.7 (5.6-5.9)", rotation angle = 0
  Source counts = 6254.9 +/- 89.8
  Background counts = 1806.9
  Rate = 0.6 +/- 0.009
[Tue Jul 24 11:44:41 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 11:44:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 11:44:41 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 11:44:41 2012] Source does appear to be extended
[Tue Jul 24 11:44:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 11:44:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 11:44:53 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Tue Jul 24 11:44:53 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.905
[Tue Jul 24 11:44:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.74"
[Tue Jul 24 12:17:27 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 24 12:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 12:17:27 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 24 12:17:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 12:17:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 12:17:27 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 24 12:17:27 2012] fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 24 12:17:27 2012] Fit fullrun_pn_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 24 12:48:25 2012] Spatial fit model total counts = 8035.730000, observed total counts = 7866.000000
[Tue Jul 24 12:48:25 2012] Offset between fit and detection position for source 1 = 0.000003 pixels
[Tue Jul 24 12:48:25 2012] 8061.840000 total counts/ 1807.120000 bgd. counts: snr = 147.134452
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000003 pixels
  Position = (299.4, 323.1) = 4 40 17.25 -43 33 7.7
  Extent = 5.7 (5.6-5.9)", rotation angle = 0
  Source counts = 6254.7 +/- 89.8
  Background counts = 1807.1
  Rate = 0.6 +/- 0.009
[Tue Jul 24 12:48:25 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 12:48:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 12:48:25 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 12:48:25 2012] Source does appear to be extended
[Tue Jul 24 12:48:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 12:48:34 2012] Counts = 6254.720000, rescaling region sizes by 2.000000
[Tue Jul 24 12:48:34 2012] XMMSAS src. selection expression = ellipse(26000.778000, 28064.585800, 689.184020, 689.184020, 0.000000, X, Y)
[Tue Jul 24 12:48:34 2012] Writing source region out to fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 24 12:48:34 2012] Extracting stamp from image fullrun_pn_xmm0104860201_pi300-10000_cl_sm2.00.img.gz, (260, 284) - (339, 363)
[Tue Jul 24 12:48:35 2012] XMMSAS bgd. selection expression = annulus(26000.778000, 28064.585800, 2297.280066, 4594.560132, X, Y) && !ellipse(30951.353912, 32824.208923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23783.685486, 31479.165771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29908.413269, 30066.007843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29476.150604, 27520.660461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29766.796600, 26387.616800, 510.281615, 510.281615, 0.000000, X, Y)
[Tue Jul 24 12:48:35 2012] Writing fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1.gif
[Tue Jul 24 12:48:42 2012] Mean detx,y = (131.28, -315.49) 
[Tue Jul 24 12:48:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 12:49:54 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 12:49:54 2012] Setting source spectrum file to fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 12:49:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 24 13:35:51 2012] Updating aperture counts using extracted products
[Tue Jul 24 13:35:51 2012] Error reading totcts from fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 13:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 13:35:52 2012] Using photon index=1.80, rate=0.626, arf fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 13:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 13:35:52 2012] Updating source flux to 1.5e-12
[Tue Jul 24 13:36:27 2012] Reading fit data from xmm0104860201/analysis//spectral/fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 24 13:36:27 2012] Spectral fit parameter nH value = 7.7654e+20
[Tue Jul 24 13:36:27 2012] Spectral fit parameter PhoIndex value = 1.80557
[Tue Jul 24 13:36:27 2012] Failed to get F(0.3-8.0) from xmm0104860201/analysis//spectral/fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 24 13:36:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 13:36:27 2012] Using Nh = 7.8e+20, photon index=1.81, rate=0.626, arf fullrun_pn_xmm0104860201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 13:36:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 13:36:27 2012] Updating source flux to 1.8e-12