[Tue Jul 24 10:12:25 2012] Detection parameters:
  Position = (299.5, 323.0) = 4 40 17.22 -43 33 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3747.9 +/- 72.5
  Background counts = 4.1
  Rate = 0.3 +/- 0.006

[Tue Jul 24 10:12:26 2012] Off-axis axis estimate = 1.78'
[Tue Jul 24 11:23:04 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 11:23:04 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Jul 24 11:23:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.050
[Tue Jul 24 11:23:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Tue Jul 24 11:44:35 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 24 11:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 11:44:35 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 24 11:44:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_src1.csv
[Tue Jul 24 11:44:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 11:44:35 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 24 11:44:35 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 24 11:44:35 2012] Fit fullrun_mos2_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jul 24 11:44:46 2012] Spatial fit model total counts = 3351.400000, observed total counts = 3270.000000
[Tue Jul 24 11:44:46 2012] Offset between fit and detection position for source 1 = 0.211114 pixels
[Tue Jul 24 11:44:46 2012] 3362.349000 total counts/ 755.969000 bgd. counts: snr = 94.795068
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.211114 pixels
  Position = (299.3, 323.0) = 4 40 17.31 -43 33 8.3
  Extent = 5.3 (5.1-5.5)", rotation angle = 0
  Source counts = 2606.4 +/- 58.0
  Background counts = 756.0
  Rate = 0.2 +/- 0.005
[Tue Jul 24 11:44:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 11:44:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 11:44:46 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 11:44:46 2012] Source does appear to be extended
[Tue Jul 24 11:44:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 12:34:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 24 12:34:48 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Tue Jul 24 12:34:48 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.009
[Tue Jul 24 12:34:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.32"
[Tue Jul 24 12:48:20 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 24 12:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 12:48:20 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 24 12:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_src1.csv
[Tue Jul 24 12:48:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 12:48:20 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 24 12:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 24 12:48:20 2012] fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 24 12:48:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 24 12:48:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 12:48:28 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Tue Jul 24 12:48:28 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 12:48:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 12:48:28 2012] Assessing source extent using major axis lower bound
[Tue Jul 24 12:48:28 2012] Source does appear to be extended
[Tue Jul 24 12:48:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:29:04 2012] Counts = 2606.380000, rescaling region sizes by 2.000000
[Tue Jul 24 13:29:04 2012] XMMSAS src. selection expression = ellipse(25987.941400, 28054.192000, 638.956818, 638.956818, 0.000000, X, Y)
[Tue Jul 24 13:29:04 2012] Writing source region out to fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 24 13:29:04 2012] Extracting stamp from image fullrun_mos2_xmm0104860201_pi300-10000_cl_sm2.00.img.gz, (263, 286) - (336, 360)
[Tue Jul 24 13:29:04 2012] XMMSAS bgd. selection expression = annulus(25987.941400, 28054.192000, 2129.856061, 4259.712123, X, Y) && !ellipse(29900.816523, 30071.334626, 384.369162, 327.772786, 90.000000, X, Y) && !ellipse(23329.946800, 23261.715080, 658.032819, 658.032819, 0.000000, X, Y) && !ellipse(29492.236000, 27442.100000, 588.416817, 588.416817, 0.000000, X, Y)
[Tue Jul 24 13:29:04 2012] Writing fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1.gif
[Tue Jul 24 13:29:06 2012] Mean detx,y = (34.31, 164.34) 
[Tue Jul 24 13:29:07 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 13:29:22 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 13:29:22 2012] Setting source spectrum file to fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 13:29:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 24 13:35:52 2012] Updating aperture counts using extracted products
[Tue Jul 24 13:35:52 2012] Error reading totcts from fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 24 13:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 13:35:52 2012] Using photon index=1.80, rate=0.212, arf fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 13:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 13:35:52 2012] Updating source flux to 2.3e-12
[Tue Jul 24 13:36:10 2012] Reading fit data from xmm0104860201/analysis//spectral/fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 24 13:36:10 2012] Spectral fit parameter nH value = 8.44155e+20
[Tue Jul 24 13:36:10 2012] Spectral fit parameter PhoIndex value = 1.77629
[Tue Jul 24 13:36:10 2012] Failed to get F(0.3-8.0) from xmm0104860201/analysis//spectral/fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 24 13:36:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 13:36:10 2012] Using Nh = 8.4e+20, photon index=1.78, rate=0.212, arf fullrun_mos2_xmm0104860201_pi300-10000_pass1_cl_src1.arf
[Tue Jul 24 13:36:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 13:36:10 2012] Updating source flux to 2.5e-12