[Tue Jul 24 10:11:57 2012] Detection parameters:
  Position = (340.6, 387.0) = 4 40 0.79 -43 28 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.4 +/- 20.6
  Background counts = 3.3
  Rate = 0.01 +/- 0.002

[Tue Jul 24 10:11:57 2012] Off-axis axis estimate = 7.11'
[Tue Jul 24 11:02:20 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 11:02:20 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Tue Jul 24 11:02:20 2012] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.544
[Tue Jul 24 11:02:20 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.98"
[Tue Jul 24 11:23:03 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jul 24 11:23:03 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jul 24 11:23:03 2012] Fit fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue Jul 24 11:23:04 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jul 24 11:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 24 11:23:04 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jul 24 11:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jul 24 11:23:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 11:44:43 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.042395 pixels away
[Tue Jul 24 11:44:43 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 11:44:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 11:44:43 2012] Assessing source extent using major
[Tue Jul 24 11:44:43 2012] Source does appear to be extended
[Tue Jul 24 11:44:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 12:17:27 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 12:17:27 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Tue Jul 24 12:17:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.544
[Tue Jul 24 12:17:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.98"
[Tue Jul 24 12:34:47 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jul 24 12:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_src3.csv
[Tue Jul 24 12:34:47 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jul 24 12:34:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_src3.csv
[Tue Jul 24 12:34:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 12:34:48 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jul 24 12:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul 24 12:34:48 2012] fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jul 24 12:34:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Jul 24 12:34:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104860201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 12:48:27 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 139.293683 pixels away
[Tue Jul 24 12:48:27 2012] Source 3 is offset by 0.631332 and 1.872299 pixels which is larger than
2 X fitted extent = 1.147618 x 1.147618, not incorporating fit results
[Tue Jul 24 12:48:27 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 12:48:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 12:48:27 2012] Assessing source extent using major
[Tue Jul 24 12:48:27 2012] Source does appear to be extended
[Tue Jul 24 12:48:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 13:19:32 2012] XMMSAS src. selection expression = ellipse(29583.827972, 33620.500000, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 24 13:19:32 2012] Writing source region out to fullrun_mos1_xmm0104860201_pi300-10000_pass1_cl_src3_src.reg
[Tue Jul 24 13:19:32 2012] Extracting stamp from image fullrun_mos1_xmm0104860201_pi300-10000_cl_sm2.00.img.gz, (303, 350) - (378, 424)
[Tue Jul 24 13:19:32 2012] XMMSAS bgd. selection expression = annulus(29583.827972, 33620.500000, 1087.500000, 2175.000000, X, Y)
[Tue Jul 24 13:19:32 2012] Writing fullrun_mos1_xmm0104860201_pi300-10000_pass1_cl_src3.gif
[Tue Jul 24 13:20:01 2012] Mean detx,y = (3253.23, 5646.64) 
[Tue Jul 24 13:20:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 24 13:20:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 24 13:20:19 2012] Setting source spectrum file to fullrun_mos1_xmm0104860201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jul 24 13:20:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0104860201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jul 24 13:28:07 2012] Not generating rmf since there are only 93 counts
[Tue Jul 24 13:28:07 2012] rmf not generated due to insufficient counts
[Tue Jul 24 13:35:52 2012] Updating aperture counts using extracted products
[Tue Jul 24 13:35:52 2012] Error reading totcts from fullrun_mos1_xmm0104860201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jul 24 13:35:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 24 13:35:52 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos1_xmm0104860201_pi300-10000_pass1_cl_src3.arf
[Tue Jul 24 13:35:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 24 13:35:52 2012] Updating source flux to 1.6e-13
[Tue Jul 24 13:35:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting