[Thu May  9 13:01:58 2013] Detection parameters:
  Position = (242.7, 171.6) = 4 22 44.04 -38 54 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.8 +/- 11.8
  Background counts = 39.4
  Rate = 0.003 +/- 0.0007

[Thu May  9 13:01:58 2013] Off-axis axis estimate = 10.05'
[Thu May  9 13:03:40 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Thu May  9 13:03:40 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 13:03:40 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Thu May  9 13:03:40 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.070
[Thu May  9 13:03:40 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.45"
[Thu May  9 13:20:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May  9 13:20:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_src3.csv
[Thu May  9 13:20:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May  9 13:20:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_src3.csv
[Thu May  9 13:20:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:20:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May  9 13:20:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  9 13:20:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May  9 13:20:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  9 13:20:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:40:11 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.075448 pixels away
[Thu May  9 13:40:11 2013] Vigneting correction estimate = 1.000000
[Thu May  9 13:40:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 13:40:11 2013] Assessing source extent using major
[Thu May  9 13:40:11 2013] Source does appear to be extended
[Thu May  9 13:40:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 13:40:20 2013] Using EEF radius (= 11.45 ")to estimate initial spatial extent for simple fitting
[Thu May  9 13:40:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  9 13:40:20 2013] Initial guess for spatial extent in simple fitting = 11.45"
[Thu May  9 13:40:20 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.070
[Thu May  9 13:40:20 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.45"
[Thu May  9 13:56:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May  9 13:56:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May  9 13:56:15 2013] Fit fullrun_pn_xmm0104860101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu May  9 13:56:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May  9 13:56:15 2013] fullrun_pn_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  9 13:56:15 2013] Fit fullrun_pn_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May  9 14:16:47 2013] Spatial fit model total counts = 95.543000, observed total counts = 87.000000
[Thu May  9 14:16:47 2013] Offset between fit and detection position for source 3 = 1.959103 pixels
[Thu May  9 14:16:47 2013] 95.439000 total counts/ 58.252900 bgd. counts: snr = 4.872164
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.959103 pixels
  Position = (241.2, 172.9) = 4 22 44.59 -38 54 25.6
  Extent = 12.7 (8.7-19.5)" x 4.8 (3.3-7.2)", rotation angle = 45 (26-60) degrees
  Source counts = 37.2 +/- 9.8
  Background counts = 58.3
  Rate = 0.004 +/- 0.001
[Thu May  9 14:16:47 2013] Vigneting correction estimate = 1.000000
[Thu May  9 14:16:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 14:16:47 2013] Assessing source extent using major axis lower bound
[Thu May  9 14:16:47 2013] Source does appear to be extended
[Thu May  9 14:16:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Thu May  9 14:16:55 2013] XMMSAS src. selection expression = ellipse(20939.706400, 14989.609600, 762.162022, 288.965408, 44.514722, X, Y)
[Thu May  9 14:16:55 2013] Writing source region out to fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3_src.reg
[Thu May  9 14:16:55 2013] Extracting stamp from image fullrun_pn_xmm0104860101_pi300-10000_cl_sm2.00.img.gz, (197, 129) - (285, 217)
[Thu May  9 14:16:55 2013] XMMSAS bgd. selection expression = annulus(20939.706400, 14989.609600, 1270.270037, 2540.540073, X, Y)
[Thu May  9 14:16:55 2013] Writing fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3.gif
[Thu May  9 14:18:14 2013] Mean detx,y = (2450.55, 12958.86) 
[Thu May  9 14:18:15 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 14:18:32 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 14:18:32 2013] Setting source spectrum file to fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May  9 14:18:32 2013] Setting bgd. spectrum file to fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May  9 14:26:49 2013] Not generating rmf since there are only 37 counts
[Thu May  9 14:26:49 2013] rmf not generated due to insufficient counts
[Thu May  9 15:08:24 2013] Updating aperture counts using extracted products
[Thu May  9 15:08:24 2013] Total counts from fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 51.00
[Thu May  9 15:08:24 2013] Total counts from fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 456.00
[Thu May  9 15:08:24 2013] Got source and background scale factors 696000.000000, 8728165.000000
[Thu May  9 15:08:24 2013] User source parameters:
  Position = (241.2, 172.9) = 4 22 44.59 -38 54 25.6
  Extent = 12.7 (8.7-19.5)" x 4.8 (3.3-7.2)", rotation angle = 45 (26-60) degrees
  Source aperture counts = 14.6 +/- 8.2
  Background aperture counts = 36.4
  Rate = 0.002 +/- 0.0009

[Thu May  9 15:08:26 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 15:08:26 2013] Using photon index=1.80, rate=0.00392, arf fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3.arf
[Thu May  9 15:08:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 15:08:26 2013] Updating source flux to 2.6e-14
[Thu May  9 15:08:32 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  9 15:08:33 2013] xmm0104860101/analysis//spectral/fullrun_pn_xmm0104860101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete