[Thu May  9 13:02:23 2013] Detection parameters:
  Position = (344.1, 184.5) = 4 22 6.26 -38 53 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.5 +/- 12.6
  Background counts = 36.9
  Rate = 0.006 +/- 0.001

[Thu May  9 13:02:23 2013] Off-axis axis estimate = 8.90'
[Thu May  9 13:31:39 2013] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Thu May  9 13:31:39 2013] Initial guess for spatial extent in simple fitting = 10.88"
[Thu May  9 13:31:39 2013] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.833
[Thu May  9 13:31:39 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.88"
[Thu May  9 13:40:09 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_src6.ximg exists
[Thu May  9 13:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_src6.csv
[Thu May  9 13:40:09 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May  9 13:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_src6.csv
[Thu May  9 13:40:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:40:09 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May  9 13:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May  9 13:40:09 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May  9 13:40:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May  9 13:40:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 13:40:14 2013] Spatial fit model total counts = 160.666000, observed total counts = 145.000000
[Thu May  9 13:40:14 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 13:40:14 2013] Vigneting correction estimate = 1.000000
[Thu May  9 13:40:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 13:40:14 2013] Assessing source extent using major
[Thu May  9 13:40:14 2013] Source does appear to be extended
[Thu May  9 13:40:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 14:07:42 2013] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Thu May  9 14:07:42 2013] Initial guess for spatial extent in simple fitting = 10.88"
[Thu May  9 14:07:42 2013] source mask rpix=2.5, npix_max = 36, mask sum = 30, frac = 0.833
[Thu May  9 14:07:42 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.88"
[Thu May  9 14:16:44 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_src6.ximg exists
[Thu May  9 14:16:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_src6.csv
[Thu May  9 14:16:44 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May  9 14:16:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_src6.csv
[Thu May  9 14:16:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 14:16:44 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May  9 14:16:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May  9 14:16:44 2013] fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May  9 14:16:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Thu May  9 14:16:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104860101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 14:16:50 2013] Spatial fit model total counts = 160.665000, observed total counts = 145.000000
[Thu May  9 14:16:50 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  9 14:16:50 2013] Vigneting correction estimate = 1.000000
[Thu May  9 14:16:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  9 14:16:50 2013] Assessing source extent using major
[Thu May  9 14:16:50 2013] Source does appear to be extended
[Thu May  9 14:16:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  9 15:02:15 2013] XMMSAS src. selection expression = ellipse(29889.005005, 16004.991272, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  9 15:02:15 2013] Writing source region out to fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10_src.reg
[Thu May  9 15:02:15 2013] Extracting stamp from image fullrun_mos2_xmm0104860101_pi300-10000_cl_sm2.00.img.gz, (307, 147) - (382, 222)
[Thu May  9 15:02:15 2013] XMMSAS bgd. selection expression = annulus(29889.005005, 16004.991272, 1087.500000, 2175.000000, X, Y)
[Thu May  9 15:02:15 2013] Writing fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10.gif
[Thu May  9 15:03:05 2013] Mean detx,y = (-8401.96, -6320.41) 
[Thu May  9 15:03:06 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  9 15:03:24 2013] Binned source spectrum to 10 counts/bin
[Thu May  9 15:03:24 2013] Setting source spectrum file to fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May  9 15:03:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May  9 15:07:41 2013] Not generating rmf since there are only 75 counts
[Thu May  9 15:07:41 2013] rmf not generated due to insufficient counts
[Thu May  9 15:08:28 2013] Updating aperture counts using extracted products
[Thu May  9 15:08:28 2013] Total counts from fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 106.00
[Thu May  9 15:08:28 2013] Total counts from fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 625.00
[Thu May  9 15:08:28 2013] Got source and background scale factors 1112194.000000, 10537345.000000
[Thu May  9 15:08:28 2013] User source parameters:
  Position = (344.1, 184.5) = 4 22 6.26 -38 53 35.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.0 +/- 11.3
  Background aperture counts = 66.0
  Rate = 0.002 +/- 0.0007

[Thu May  9 15:08:28 2013] Updating counts from extracted products
[Thu May  9 15:08:28 2013] Set source signif. to 40.03/8.12 = 4.93
[Thu May  9 15:08:29 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  9 15:08:29 2013] Using photon index=1.80, rate=0.00249, arf fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10.arf
[Thu May  9 15:08:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  9 15:08:29 2013] Updating source flux to 4.6e-14
[Thu May  9 15:08:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  9 15:08:32 2013] xmm0104860101/analysis//spectral/fullrun_mos2_xmm0104860101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete