[Fri Jul 27 13:58:58 2012] Detection parameters:
  Position = (389.9, 285.5) = 18 25 33.28 -12 15 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 9.2
  Background counts = 12.0
  Rate = 0.01 +/- 0.002

[Fri Jul 27 13:58:58 2012] Off-axis axis estimate = 6.69'
[Fri Jul 27 14:01:02 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 14:01:02 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Jul 27 14:01:02 2012] source mask rpix=2.2, npix_max = 30, mask sum = 27, frac = 0.894
[Fri Jul 27 14:01:02 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.78"
[Fri Jul 27 14:10:24 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 27 14:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 14:10:24 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 27 14:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 14:10:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:10:24 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 27 14:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 27 14:10:24 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 27 14:10:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 27 14:10:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:31:06 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.947939 pixels away
[Fri Jul 27 14:31:06 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 14:31:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 14:31:06 2012] Assessing source extent using major
[Fri Jul 27 14:31:06 2012] Source does appear to be extended
[Fri Jul 27 14:31:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 14:31:18 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 14:31:18 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Jul 27 14:31:18 2012] source mask rpix=2.2, npix_max = 30, mask sum = 27, frac = 0.894
[Fri Jul 27 14:31:18 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.78"
[Fri Jul 27 14:41:18 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 27 14:41:18 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 27 14:41:18 2012] Fit fullrun_pn_xmm0104460701_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jul 27 14:41:18 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 27 14:41:18 2012] fullrun_pn_xmm0104460701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 27 14:41:18 2012] Fit fullrun_pn_xmm0104460701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jul 27 15:03:46 2012] Spatial fit model total counts = 110.352000, observed total counts = 113.000000
[Fri Jul 27 15:03:46 2012] Offset between fit and detection position for source 4 = 0.242823 pixels
[Fri Jul 27 15:03:46 2012] 108.679100 total counts/ 91.009100 bgd. counts: snr = 1.852227
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.242823 pixels
  Position = (389.9, 285.3) = 18 25 33.27 -12 15 53.2
  Extent = 3.9 (2.5-5.8)", rotation angle = 0
  Source counts = 17.7 +/- 10.4
  Background counts = 91.0
  Rate = 0.003 +/- 0.002
[Fri Jul 27 15:03:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 15:03:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 15:03:46 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 15:03:46 2012] Source does appear to be extended
[Fri Jul 27 15:03:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 15:03:57 2012] XMMSAS src. selection expression = ellipse(33871.832060, 24770.981600, 236.983207, 236.983207, 0.000000, X, Y)
[Fri Jul 27 15:03:57 2012] Writing source region out to fullrun_pn_xmm0104460701_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 27 15:03:57 2012] Extracting stamp from image fullrun_pn_xmm0104460701_pi300-10000_cl_sm2.00.img.gz, (376, 272) - (404, 299)
[Fri Jul 27 15:03:57 2012] XMMSAS bgd. selection expression = annulus(33871.832060, 24770.981600, 394.972011, 789.944023, X, Y) && !ellipse(33673.567800, 25996.113000, 527.338415, 527.338415, 0.000000, X, Y)
[Fri Jul 27 15:03:57 2012] Writing fullrun_pn_xmm0104460701_pi300-10000_pass1_cl_src4.gif
[Fri Jul 27 15:05:43 2012] Mean detx,y = (6940.90, 2381.86) 
[Fri Jul 27 15:05:45 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 15:06:04 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 15:06:05 2012] Setting source spectrum file to fullrun_pn_xmm0104460701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 15:06:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0104460701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 27 15:10:21 2012] Not generating rmf since there are only 17 counts
[Fri Jul 27 15:10:21 2012] rmf not generated due to insufficient counts
[Fri Jul 27 15:16:26 2012] Updating aperture counts using extracted products
[Fri Jul 27 15:16:26 2012] Error reading totcts from fullrun_pn_xmm0104460701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 15:16:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 15:16:26 2012] Using photon index=1.80, rate=0.00349, arf fullrun_pn_xmm0104460701_pi300-10000_pass1_cl_src4.arf
[Fri Jul 27 15:16:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 15:16:26 2012] Updating source flux to 1.8e-14
[Fri Jul 27 15:16:31 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting