[Fri Jul 27 14:00:01 2012] Detection parameters:
  Position = (203.1, 373.6) = 18 26 28.71 -12 9 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.8 +/- 7.6
  Background counts = 3.1
  Rate = 0.005 +/- 0.001

[Fri Jul 27 14:00:01 2012] Off-axis axis estimate = 8.81'
[Fri Jul 27 14:19:00 2012] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 14:19:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 14:19:00 2012] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Jul 27 14:19:00 2012] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.951
[Fri Jul 27 14:19:00 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.83"
[Fri Jul 27 14:31:01 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 27 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 14:31:01 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 27 14:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 14:31:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:31:01 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 27 14:31:01 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 27 14:31:01 2012] Fit fullrun_mos2_xmm0104460701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Fri Jul 27 14:31:10 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.624057 pixels away
[Fri Jul 27 14:31:10 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 14:31:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 14:31:10 2012] Assessing source extent using major
[Fri Jul 27 14:31:10 2012] Source does appear to be extended
[Fri Jul 27 14:31:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 14:53:11 2012] Using EEF radius (= 10.83 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 14:53:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 14:53:11 2012] Initial guess for spatial extent in simple fitting = 10.83"
[Fri Jul 27 14:53:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 34, frac = 0.951
[Fri Jul 27 14:53:11 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.83"
[Fri Jul 27 15:03:43 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 27 15:03:43 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 27 15:03:43 2012] Fit fullrun_mos2_xmm0104460701_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jul 27 15:03:43 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 27 15:03:43 2012] fullrun_mos2_xmm0104460701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 27 15:03:43 2012] Fit fullrun_mos2_xmm0104460701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jul 27 15:03:50 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.192541 pixels away
[Fri Jul 27 15:03:50 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 15:03:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 15:03:50 2012] Assessing source extent using major
[Fri Jul 27 15:03:50 2012] Source does appear to be extended
[Fri Jul 27 15:03:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 15:12:57 2012] XMMSAS src. selection expression = ellipse(17616.894073, 32457.528137, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 27 15:12:57 2012] Writing source region out to fullrun_mos2_xmm0104460701_pi300-10000_pass1_cl_src3_src.reg
[Fri Jul 27 15:12:57 2012] Extracting stamp from image fullrun_mos2_xmm0104460701_pi300-10000_cl_sm2.00.img.gz, (166, 336) - (241, 411)
[Fri Jul 27 15:12:57 2012] XMMSAS bgd. selection expression = annulus(17616.894073, 32457.528137, 1087.500000, 2175.000000, X, Y)
[Fri Jul 27 15:12:57 2012] Writing fullrun_mos2_xmm0104460701_pi300-10000_pass1_cl_src3.gif
[Fri Jul 27 15:13:56 2012] Mean detx,y = (9692.37, 4514.20) 
[Fri Jul 27 15:13:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 15:14:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 15:14:27 2012] Setting source spectrum file to fullrun_mos2_xmm0104460701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 15:14:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104460701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jul 27 15:15:45 2012] Not generating rmf since there are only 36 counts
[Fri Jul 27 15:15:45 2012] rmf not generated due to insufficient counts
[Fri Jul 27 15:16:27 2012] Updating aperture counts using extracted products
[Fri Jul 27 15:16:27 2012] Error reading totcts from fullrun_mos2_xmm0104460701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jul 27 15:16:28 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 15:16:28 2012] Using photon index=1.80, rate=0.00483, arf fullrun_mos2_xmm0104460701_pi300-10000_pass1_cl_src3.arf
[Fri Jul 27 15:16:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 15:16:28 2012] Updating source flux to 1.1e-13
[Fri Jul 27 15:16:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 27 15:16:31 2012] xmm0104460701/analysis//spectral/fullrun_mos2_xmm0104460701_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete