[Fri Jul 27 16:59:58 2012] Detection parameters:
  Position = (337.5, 353.1) = 18 28 11.70 -11 4 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.0 +/- 8.0
  Background counts = 10.1
  Rate = 0.003 +/- 0.0007

[Fri Jul 27 16:59:58 2012] Off-axis axis estimate = 4.87'
[Fri Jul 27 17:19:38 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:19:38 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Fri Jul 27 17:19:38 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Fri Jul 27 17:19:38 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.86"
[Fri Jul 27 17:28:18 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 27 17:28:18 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 27 17:28:18 2012] Fit fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src6 appears to have run properly
[Fri Jul 27 17:28:18 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 27 17:28:18 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 27 17:28:18 2012] Fit fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jul 27 17:37:18 2012] Spatial fit model total counts = 107.709000, observed total counts = 117.000000
[Fri Jul 27 17:37:18 2012] Offset between fit and detection position for source 5 = 0.731027 pixels
[Fri Jul 27 17:37:18 2012] 106.146900 total counts/ 76.225800 bgd. counts: snr = 3.427098
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.731027 pixels
  Position = (336.8, 352.9) = 18 28 11.92 -11 4 38.2
  Extent = 10.8 (6.7-17.7)" x 3.5 (2.2-5.5)", rotation angle = 316 (300-333) degrees
  Source counts = 29.9 +/- 10.3
  Background counts = 76.2
  Rate = 0.002 +/- 0.0008
[Fri Jul 27 17:37:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:37:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:37:18 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 17:37:18 2012] Source does appear to be extended
[Fri Jul 27 17:37:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Fri Jul 27 17:45:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:45:22 2012] Initial guess for spatial extent in simple fitting = 7.17"
[Fri Jul 27 17:45:22 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.867
[Fri Jul 27 17:45:22 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.17"
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jul 27 17:52:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src6.csv
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jul 27 17:52:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src6.csv
[Fri Jul 27 17:52:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jul 27 17:52:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jul 27 17:52:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 27 17:52:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 18:02:44 2012] Spatial fit model total counts = 106.288000, observed total counts = 118.000000
[Fri Jul 27 18:02:44 2012] Offset between fit and detection position for source 5 = 0.112701 pixels
[Fri Jul 27 18:02:44 2012] 104.653800 total counts/ 76.921700 bgd. counts: snr = 3.161974
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.112701 pixels
  Position = (336.9, 353.0) = 18 28 11.89 -11 4 38.0
  Extent = 6.7 (2.8-10.7)", rotation angle = 0
  Source counts = 27.7 +/- 10.2
  Background counts = 76.9
  Rate = 0.002 +/- 0.0008
[Fri Jul 27 18:02:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 18:02:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 18:02:44 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 18:02:44 2012] Source does appear to be extended
[Fri Jul 27 18:02:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 18:10:08 2012] XMMSAS src. selection expression = ellipse(29258.237200, 30661.477200, 399.831012, 399.831012, 0.000000, X, Y)
[Fri Jul 27 18:10:08 2012] Writing source region out to fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src5_src.reg
[Fri Jul 27 18:10:08 2012] Extracting stamp from image fullrun_mos1_xmm0104460401_pi300-10000_cl_sm2.00.img.gz, (314, 330) - (360, 376)
[Fri Jul 27 18:10:08 2012] XMMSAS bgd. selection expression = annulus(29258.237200, 30661.477200, 666.385019, 1332.770038, X, Y)
[Fri Jul 27 18:10:08 2012] Writing fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src5.gif
[Fri Jul 27 18:12:03 2012] Mean detx,y = (3259.96, 1232.73) 
[Fri Jul 27 18:12:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 18:12:17 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 18:12:17 2012] Setting source spectrum file to fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 27 18:12:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul 27 18:16:39 2012] Not generating rmf since there are only 27 counts
[Fri Jul 27 18:16:39 2012] rmf not generated due to insufficient counts
[Fri Jul 27 18:27:21 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:27:21 2012] Error reading totcts from fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 27 18:27:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:27:21 2012] Using photon index=1.80, rate=0.00223, arf fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src5.arf
[Fri Jul 27 18:27:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:27:21 2012] Updating source flux to 2.8e-14
[Fri Jul 27 18:27:23 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting