[Fri Jul 27 16:59:58 2012] Detection parameters:
  Position = (222.1, 179.8) = 18 28 45.80 -11 17 12.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 485.0 +/- 25.6
  Background counts = 5.5
  Rate = 0.04 +/- 0.002

[Fri Jul 27 16:59:58 2012] Off-axis axis estimate = 10.22'
[Fri Jul 27 17:19:38 2012] Using EEF radius (= 11.54 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:19:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 17:19:38 2012] Initial guess for spatial extent in simple fitting = 11.54"
[Fri Jul 27 17:19:38 2012] source mask rpix=2.7, npix_max = 39, mask sum = 36, frac = 0.905
[Fri Jul 27 17:19:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.54"
[Fri Jul 27 17:28:17 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 17:28:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 17:28:17 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 17:28:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 17:28:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:28:18 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 17:28:18 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 17:28:18 2012] Fit fullrun_mos1_xmm0104460401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 27 17:37:18 2012] Spatial fit model total counts = 529.101000, observed total counts = 534.000000
[Fri Jul 27 17:37:18 2012] Offset between fit and detection position for source 1 = 0.162882 pixels
[Fri Jul 27 17:37:18 2012] 533.313000 total counts/ 165.205000 bgd. counts: snr = 28.639383
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162882 pixels
  Position = (222.3, 179.8) = 18 28 45.76 -11 17 11.4
  Extent = 6.6 (6.0-7.2)", rotation angle = 0
  Source counts = 368.1 +/- 23.1
  Background counts = 165.2
  Rate = 0.03 +/- 0.002
[Fri Jul 27 17:37:18 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:37:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:37:18 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 17:37:18 2012] Source does appear to be extended
[Fri Jul 27 17:37:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:45:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:45:22 2012] Initial guess for spatial extent in simple fitting = 6.60"
[Fri Jul 27 17:45:22 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.983
[Fri Jul 27 17:45:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.60"
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 17:52:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 17:52:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 17:52:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 17:52:59 2012] fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 17:52:59 2012] Fit fullrun_mos1_xmm0104460401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 27 18:02:44 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Fri Jul 27 18:02:44 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 18:02:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 18:02:44 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 18:02:44 2012] Source does appear to be extended
[Fri Jul 27 18:02:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 18:10:08 2012] XMMSAS src. selection expression = ellipse(19289.843600, 15593.027000, 395.970611, 395.970611, 0.000000, X, Y)
[Fri Jul 27 18:10:08 2012] Writing source region out to fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 27 18:10:08 2012] Extracting stamp from image fullrun_mos1_xmm0104460401_pi300-10000_cl_sm2.00.img.gz, (200, 157) - (245, 203)
[Fri Jul 27 18:10:08 2012] XMMSAS bgd. selection expression = annulus(19289.843600, 15593.027000, 659.951019, 1319.902038, X, Y)
[Fri Jul 27 18:10:08 2012] Writing fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1.gif
[Fri Jul 27 18:10:12 2012] Mean detx,y = (-12226.46, -7436.52) 
[Fri Jul 27 18:10:14 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 18:10:39 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 18:10:39 2012] Setting source spectrum file to fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 18:10:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 27 18:27:21 2012] Updating aperture counts using extracted products
[Fri Jul 27 18:27:21 2012] Error reading totcts from fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 27 18:27:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:27:21 2012] Using photon index=1.80, rate=0.0296, arf fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 18:27:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:27:21 2012] Updating source flux to 8.3e-13
[Fri Jul 27 18:27:33 2012] Reading fit data from xmm0104460401/analysis//spectral/fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 27 18:27:33 2012] Spectral fit parameter nH value = 3.11622e+21
[Fri Jul 27 18:27:33 2012] Spectral fit parameter PhoIndex value = 3.97817
[Fri Jul 27 18:27:33 2012] Failed to get F(0.3-8.0) from xmm0104460401/analysis//spectral/fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 27 18:27:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 27 18:27:33 2012] Using Nh = 3.1e+21, photon index=3.98, rate=0.0296, arf fullrun_mos1_xmm0104460401_pi300-10000_pass1_cl_src1.arf
[Fri Jul 27 18:27:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 27 18:27:33 2012] Updating source flux to 5.4e-13