[Tue Jul 31 10:16:04 2012] Detection parameters:
  Position = (317.5, 236.4) = 18 27 30.67 -11 35 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 10.5
  Background counts = 24.0
  Rate = 0.007 +/- 0.002

[Tue Jul 31 10:16:05 2012] Off-axis axis estimate = 4.71'
[Tue Jul 31 10:18:43 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 10:18:43 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Tue Jul 31 10:18:43 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Tue Jul 31 10:18:43 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 8.78"
[Tue Jul 31 10:41:20 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_src7.ximg exists
[Tue Jul 31 10:41:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_src7.csv
[Tue Jul 31 10:41:20 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Jul 31 10:41:20 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_src7.csv
[Tue Jul 31 10:41:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 10:41:20 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Jul 31 10:41:20 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Jul 31 10:41:20 2012] Fit fullrun_pn_xmm0104460301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Jul 31 11:11:22 2012] Spatial fit model total counts = 148.000000, observed total counts = 148.000000
[Tue Jul 31 11:11:22 2012] Offset between fit and detection position for source 7 = 0.355058 pixels
[Tue Jul 31 11:11:22 2012] 151.040500 total counts/ 127.381000 bgd. counts: snr = 2.096299
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.355058 pixels
  Position = (317.2, 236.2) = 18 27 30.77 -11 35 10.1
  Extent = 4.4 (3.0-6.5)", rotation angle = 0
  Source counts = 23.7 +/- 12.3
  Background counts = 127.4
  Rate = 0.003 +/- 0.002
[Tue Jul 31 11:11:22 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 11:11:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 11:11:22 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 11:11:22 2012] Source does appear to be extended
[Tue Jul 31 11:11:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 11:11:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 31 11:11:36 2012] Initial guess for spatial extent in simple fitting = 4.41"
[Tue Jul 31 11:11:36 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.982
[Tue Jul 31 11:11:36 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.41"
[Tue Jul 31 11:33:05 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Jul 31 11:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_src7.csv
[Tue Jul 31 11:33:05 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Jul 31 11:33:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_src7.csv
[Tue Jul 31 11:33:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 11:33:05 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Jul 31 11:33:05 2012] fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Jul 31 11:33:05 2012] Fit fullrun_pn_xmm0104460301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Jul 31 12:04:08 2012] Spatial fit model total counts = 148.000000, observed total counts = 148.000000
[Tue Jul 31 12:04:08 2012] Offset between fit and detection position for source 7 = 0.000017 pixels
[Tue Jul 31 12:04:08 2012] 151.040800 total counts/ 127.380000 bgd. counts: snr = 2.096422
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.000017 pixels
  Position = (317.2, 236.2) = 18 27 30.77 -11 35 10.1
  Extent = 4.4 (3.0-6.5)", rotation angle = 0
  Source counts = 23.7 +/- 12.3
  Background counts = 127.4
  Rate = 0.003 +/- 0.002
[Tue Jul 31 12:04:08 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 12:04:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 12:04:08 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 12:04:08 2012] Source does appear to be extended
[Tue Jul 31 12:04:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 12:04:22 2012] XMMSAS src. selection expression = ellipse(27547.617180, 20505.143800, 264.688808, 264.688808, 0.000000, X, Y)
[Tue Jul 31 12:04:22 2012] Writing source region out to fullrun_pn_xmm0104460301_pi300-10000_pass1_cl_src7_src.reg
[Tue Jul 31 12:04:22 2012] Extracting stamp from image fullrun_pn_xmm0104460301_pi300-10000_cl_sm2.00.img.gz, (302, 221) - (332, 251)
[Tue Jul 31 12:04:22 2012] XMMSAS bgd. selection expression = annulus(27547.617180, 20505.143800, 441.148013, 882.296025, X, Y)
[Tue Jul 31 12:04:22 2012] Writing fullrun_pn_xmm0104460301_pi300-10000_pass1_cl_src7.gif
[Tue Jul 31 12:09:11 2012] Mean detx,y = (881.29, 6790.51) 
[Tue Jul 31 12:09:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 12:09:37 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 12:09:38 2012] Setting source spectrum file to fullrun_pn_xmm0104460301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jul 31 12:09:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0104460301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jul 31 12:14:33 2012] Not generating rmf since there are only 23 counts
[Tue Jul 31 12:14:33 2012] rmf not generated due to insufficient counts
[Tue Jul 31 12:25:40 2012] Updating aperture counts using extracted products
[Tue Jul 31 12:25:40 2012] Error reading totcts from fullrun_pn_xmm0104460301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jul 31 12:25:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 31 12:25:41 2012] Using photon index=1.80, rate=0.00309, arf fullrun_pn_xmm0104460301_pi300-10000_pass1_cl_src7.arf
[Tue Jul 31 12:25:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 31 12:25:41 2012] Updating source flux to 1.4e-14
[Tue Jul 31 12:25:46 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jul 31 12:25:47 2012] xmm0104460301/analysis//spectral/fullrun_pn_xmm0104460301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete