[Fri Jun 29 20:29:00 2012] Detection parameters:
  Position = (202.1, 259.7) = 14 3 53.88 54 15 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.7 +/- 20.7
  Background counts = 130.1
  Rate = 0.003 +/- 0.0005

[Fri Jun 29 20:29:01 2012] Off-axis axis estimate = 7.53'
[Fri Jun 29 20:32:46 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 20:32:46 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Fri Jun 29 20:32:46 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.928
[Fri Jun 29 20:32:46 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 10.19"
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src42.ximg exists
[Fri Jun 29 22:08:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src42.csv
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Jun 29 22:08:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src42.csv
[Fri Jun 29 22:08:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Jun 29 22:08:39 2012] Fit fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly