[Fri Jun 29 20:29:00 2012] Detection parameters:
  Position = (295.6, 310.0) = 14 3 7.43 54 19 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.5 +/- 25.6
  Background counts = 176.4
  Rate = 0.006 +/- 0.0007

[Fri Jun 29 20:29:01 2012] Off-axis axis estimate = 0.86'
[Fri Jun 29 20:32:46 2012] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 20:32:46 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Fri Jun 29 20:32:46 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927
[Fri Jun 29 20:32:46 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 6.86"
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src33.ximg exists
[Fri Jun 29 22:08:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src33_1.ximg exists
[Fri Jun 29 22:08:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src33.csv
[Fri Jun 29 22:08:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Fri Jun 29 22:08:39 2012] Fit fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly