[Fri Jun 29 20:29:00 2012] Detection parameters:
  Position = (226.4, 475.3) = 14 3 42.00 54 31 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.7 +/- 20.3
  Background counts = 111.0
  Rate = 0.003 +/- 0.0005

[Fri Jun 29 20:29:01 2012] Off-axis axis estimate = 13.85'
[Fri Jun 29 20:32:46 2012] Using EEF radius (= 13.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 20:32:46 2012] Initial guess for spatial extent in simple fitting = 13.35"
[Fri Jun 29 20:32:46 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Fri Jun 29 20:32:46 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 13.35"
[Fri Jun 29 22:08:38 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 29 22:08:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 29 22:08:38 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 29 22:08:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 29 22:08:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 29 22:08:39 2012] Fit fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly