[Fri Jun 29 20:29:00 2012] Detection parameters:
  Position = (373.9, 215.0) = 14 2 28.61 54 12 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.8 +/- 25.4
  Background counts = 121.1
  Rate = 0.007 +/- 0.0006

[Fri Jun 29 20:29:01 2012] Off-axis axis estimate = 8.16'
[Fri Jun 29 20:32:46 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 20:32:46 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Fri Jun 29 20:32:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.059
[Fri Jun 29 20:32:46 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 10.51"
[Fri Jun 29 22:08:38 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src19.ximg exists
[Fri Jun 29 22:08:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src19.csv
[Fri Jun 29 22:08:38 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src19_1.ximg exists
[Fri Jun 29 22:08:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src19.csv
[Fri Jun 29 22:08:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Fri Jun 29 22:08:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Jun 29 22:08:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Fri Jun 29 22:08:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes