[Fri Jun 29 20:29:00 2012] Detection parameters:
  Position = (281.6, 288.7) = 14 3 14.38 54 18 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4053.3 +/- 76.8
  Background counts = 169.7
  Rate = 0.1 +/- 0.003

[Fri Jun 29 20:29:01 2012] Off-axis axis estimate = 1.41'
[Fri Jun 29 20:32:46 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 20:32:46 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Fri Jun 29 20:32:46 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.092
[Fri Jun 29 20:32:46 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.13"
[Fri Jun 29 22:08:38 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 29 22:08:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 29 22:08:38 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 29 22:08:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 29 22:08:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 29 22:08:39 2012] fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 29 22:08:39 2012] Fit fullrun_pn_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly