[Fri Jun 29 20:29:28 2012] Detection parameters:
  Position = (145.8, 306.1) = 14 4 21.93 54 19 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.7 +/- 17.3
  Background counts = 26.5
  Rate = 0.004 +/- 0.0004

[Fri Jun 29 20:29:29 2012] Off-axis axis estimate = 11.08'
[Fri Jun 29 22:08:39 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 22:08:39 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Fri Jun 29 22:08:39 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.851
[Fri Jun 29 22:08:39 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 11.97"
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src15.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src15.csv
[Fri Jun 29 23:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Jun 29 23:04:54 2012] Fit fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly