[Fri Jun 29 20:29:28 2012] Detection parameters:
  Position = (274.2, 293.0) = 14 3 18.06 54 18 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.2 +/- 17.7
  Background counts = 42.2
  Rate = 0.004 +/- 0.0005

[Fri Jun 29 20:29:29 2012] Off-axis axis estimate = 1.80'
[Fri Jun 29 22:08:39 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 22:08:39 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Jun 29 22:08:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Fri Jun 29 22:08:39 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.33"
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src16.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src16.csv
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src16.csv
[Fri Jun 29 23:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Jun 29 23:04:54 2012] Fit fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly