[Fri Jun 29 20:29:28 2012] Detection parameters:
  Position = (207.5, 299.1) = 14 3 51.26 54 18 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.4 +/- 12.3
  Background counts = 31.6
  Rate = 0.003 +/- 0.0005

[Fri Jun 29 20:29:29 2012] Off-axis axis estimate = 6.60'
[Fri Jun 29 22:08:39 2012] Using EEF radius (= 9.73 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 22:08:39 2012] Initial guess for spatial extent in simple fitting = 9.73"
[Fri Jun 29 22:08:39 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.002
[Fri Jun 29 22:08:39 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.73"
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 29 23:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jun 29 23:04:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes