[Fri Jun 29 20:29:28 2012] Detection parameters:
  Position = (250.3, 348.8) = 14 3 29.97 54 22 28.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.6 +/- 13.3
  Background counts = 38.5
  Rate = 0.002 +/- 0.0004

[Fri Jun 29 20:29:29 2012] Off-axis axis estimate = 5.05'
[Fri Jun 29 22:08:39 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 22:08:39 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Fri Jun 29 22:08:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.879
[Fri Jun 29 22:08:39 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.95"
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src27.csv
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src27.csv
[Fri Jun 29 23:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Jun 29 23:04:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes