[Fri Jun 29 20:29:28 2012] Detection parameters:
  Position = (293.7, 383.6) = 14 3 8.38 54 24 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.5 +/- 11.7
  Background counts = 35.4
  Rate = 0.002 +/- 0.0003

[Fri Jun 29 20:29:29 2012] Off-axis axis estimate = 6.18'
[Fri Jun 29 22:08:39 2012] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 22:08:39 2012] Initial guess for spatial extent in simple fitting = 9.52"
[Fri Jun 29 22:08:39 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.865
[Fri Jun 29 22:08:39 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.52"
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src37.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src37.csv
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src37.csv
[Fri Jun 29 23:04:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Jun 29 23:04:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Fri Jun 29 23:04:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes