[Fri Jun 29 20:29:28 2012] Detection parameters:
  Position = (324.8, 330.6) = 14 2 52.93 54 21 11.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 235.5 +/- 20.5
  Background counts = 37.5
  Rate = 0.007 +/- 0.0006

[Fri Jun 29 20:29:29 2012] Off-axis axis estimate = 3.01'
[Fri Jun 29 22:08:39 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Fri Jun 29 22:08:39 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Fri Jun 29 22:08:39 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.787
[Fri Jun 29 22:08:39 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.93"
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src10.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src10.csv
[Fri Jun 29 23:04:53 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Jun 29 23:04:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src10.csv
[Fri Jun 29 23:04:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Jun 29 23:04:54 2012] fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Jun 29 23:04:54 2012] Fit fullrun_mos1_xmm0104260101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly