[Sun Sep  2 21:27:35 2012] Detection parameters:
  Position = (424.0, 288.0) = 5 29 47.67 -65 56 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.0 +/- 16.2
  Background counts = 6.4
  Rate = 0.007 +/- 0.0007

[Sun Sep  2 21:27:35 2012] Off-axis axis estimate = 9.13'
[Mon Sep  3 00:11:57 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 00:11:57 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Mon Sep  3 00:11:57 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Mon Sep  3 00:11:57 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.99"
[Mon Sep  3 01:23:32 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src5.ximg exists
[Mon Sep  3 01:23:32 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Sep  3 01:23:32 2012] Fit fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src5 appears to have run properly
[Mon Sep  3 01:23:32 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Sep  3 01:23:32 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Sep  3 01:23:32 2012] Fit fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Sep  3 01:23:58 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.645494 pixels away
[Mon Sep  3 01:23:58 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 01:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 01:23:58 2012] Assessing source extent using major
[Mon Sep  3 01:23:58 2012] Source does appear to be extended
[Mon Sep  3 01:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:15:10 2012] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 03:15:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 03:15:10 2012] Initial guess for spatial extent in simple fitting = 10.99"
[Mon Sep  3 03:15:10 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.982
[Mon Sep  3 03:15:10 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.99"
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src5.ximg exists
[Mon Sep  3 03:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src5.csv
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Sep  3 03:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src5.csv
[Mon Sep  3 03:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Sep  3 03:59:58 2012] Fit fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Sep  3 04:00:20 2012] Spatial fit model total counts = 212.999000, observed total counts = 213.000000
[Mon Sep  3 04:00:20 2012] Offset between fit and detection position for source 5 = 0.151205 pixels
[Mon Sep  3 04:00:20 2012] 210.509900 total counts/ 86.870900 bgd. counts: snr = 13.265338
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.151205 pixels
  Position = (423.8, 288.1) = 5 29 47.77 -65 56 41.7
  Extent = 5.8 (5.0-7.0)", rotation angle = 0
  Source counts = 123.6 +/- 14.5
  Background counts = 86.9
  Rate = 0.005 +/- 0.0006
[Mon Sep  3 04:00:20 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:00:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:00:20 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:00:20 2012] Source does appear to be extended
[Mon Sep  3 04:00:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:38:00 2012] XMMSAS src. selection expression = ellipse(36824.314060, 25013.860200, 349.641010, 349.641010, 0.000000, X, Y)
[Mon Sep  3 04:38:00 2012] Writing source region out to fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src5_src.reg
[Mon Sep  3 04:38:00 2012] Extracting stamp from image fullrun_mos2_xmm0104060201_pi300-10000_cl_sm2.00.img.gz, (404, 268) - (444, 308)
[Mon Sep  3 04:38:00 2012] XMMSAS bgd. selection expression = annulus(36824.314060, 25013.860200, 582.735017, 1165.470034, X, Y)
[Mon Sep  3 04:38:00 2012] Writing fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src5.gif
[Mon Sep  3 04:38:51 2012] Mean detx,y = (11067.58, 3066.97) 
[Mon Sep  3 04:38:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 04:38:56 2012] grppha failed
[Mon Sep  3 04:38:56 2012] Setting source spectrum file to fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src5_src.pi.gz
[Mon Sep  3 04:38:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Sep  3 04:44:57 2012] Updating aperture counts using extracted products
[Mon Sep  3 04:44:58 2012] Error reading totcts from fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src5_src.pi.gz
[Mon Sep  3 04:44:58 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 04:45:00 2012] Source 5 has no response, skipping
[Mon Sep  3 04:45:01 2012] xmm0104060201/analysis//spectral/fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete