[Sun Sep  2 21:27:35 2012] Detection parameters:
  Position = (324.8, 245.3) = 5 30 58.15 -65 59 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 10.1
  Background counts = 8.3
  Rate = 0.003 +/- 0.0006

[Sun Sep  2 21:27:35 2012] Off-axis axis estimate = 4.30'
[Mon Sep  3 00:11:57 2012] Using EEF radius (= 8.58 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 00:11:57 2012] Initial guess for spatial extent in simple fitting = 8.58"
[Mon Sep  3 00:11:57 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.777
[Mon Sep  3 00:11:57 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.58"
[Mon Sep  3 01:23:32 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src19.ximg exists
[Mon Sep  3 01:23:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src19.csv
[Mon Sep  3 01:23:32 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Sep  3 01:23:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src19.csv
[Mon Sep  3 01:23:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 01:23:33 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Sep  3 01:23:33 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Sep  3 01:23:33 2012] Fit fullrun_mos2_xmm0104060201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Sep  3 01:23:58 2012] Spatial fit model total counts = 143.504000, observed total counts = 139.000000
[Mon Sep  3 01:23:58 2012] Offset between fit and detection position for source 25 = 0.197201 pixels
[Mon Sep  3 01:23:58 2012] 116.458600 total counts/ 81.572200 bgd. counts: snr = 3.862647
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.197201 pixels
  Position = (324.7, 245.1) = 5 30 58.25 -65 59 50.0
  Extent = 2.5 (2.1-4.5)", rotation angle = 0
  Source counts = 34.9 +/- 10.8
  Background counts = 81.6
  Rate = 0.001 +/- 0.0004
[Mon Sep  3 01:23:58 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 01:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 01:23:58 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 01:23:58 2012] Source does appear to be extended
[Mon Sep  3 01:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 03:15:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 03:15:10 2012] Initial guess for spatial extent in simple fitting = 2.50"
[Mon Sep  3 03:15:10 2012] source mask rpix=0.6, npix_max = 4, mask sum = 3, frac = 0.651
[Mon Sep  3 03:15:10 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 2.50"
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src18.ximg exists
[Mon Sep  3 03:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src18.csv
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Sep  3 03:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src18.csv
[Mon Sep  3 03:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Sep  3 03:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Sep  3 03:59:58 2012] fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Sep  3 03:59:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Sep  3 03:59:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0104060201_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:00:20 2012] Warning, spatial fit 18 centroid is now closest to src. 26
[Mon Sep  3 04:00:20 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:00:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:00:20 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:00:20 2012] Source does appear to be extended
[Mon Sep  3 04:00:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:38:01 2012] XMMSAS src. selection expression = ellipse(28201.676600, 21278.201600, 149.743204, 149.743204, 0.000000, X, Y)
[Mon Sep  3 04:38:01 2012] Writing source region out to fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src25_src.reg
[Mon Sep  3 04:38:01 2012] Extracting stamp from image fullrun_mos2_xmm0104060201_pi300-10000_cl_sm2.00.img.gz, (316, 237) - (333, 254)
[Mon Sep  3 04:38:01 2012] XMMSAS bgd. selection expression = annulus(28201.676600, 21278.201600, 249.572007, 499.144014, X, Y) && !ellipse(27526.108460, 21259.083980, 368.021611, 368.021611, 0.000000, X, Y)
[Mon Sep  3 04:38:01 2012] Writing fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src25.gif
[Mon Sep  3 04:41:02 2012] Mean detx,y = (1698.64, 3505.32) 
[Mon Sep  3 04:41:03 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 04:41:08 2012] grppha failed
[Mon Sep  3 04:41:09 2012] Setting source spectrum file to fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src25_src.pi.gz
[Mon Sep  3 04:41:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon Sep  3 04:44:25 2012] Not generating rmf since there are only 34 counts
[Mon Sep  3 04:44:25 2012] rmf not generated due to insufficient counts
[Mon Sep  3 04:44:58 2012] Updating aperture counts using extracted products
[Mon Sep  3 04:44:58 2012] Error reading totcts from fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src25_src.pi.gz
[Mon Sep  3 04:44:58 2012] No arf file for this source, not re-computing flux
[Mon Sep  3 04:45:00 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep  3 04:45:01 2012] xmm0104060201/analysis//spectral/fullrun_mos2_xmm0104060201_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete