[Wed Sep  5 16:32:29 2012] Detection parameters:
  Position = (311.3, 140.1) = 5 31 7.81 -66 7 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.2 +/- 21.0
  Background counts = 36.5
  Rate = 0.007 +/- 0.0006

[Wed Sep  5 16:32:30 2012] Off-axis axis estimate = 11.52'
[Wed Sep  5 16:35:07 2012] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 16:35:07 2012] Initial guess for spatial extent in simple fitting = 12.19"
[Wed Sep  5 16:35:07 2012] source mask rpix=2.8, npix_max = 43, mask sum = 23, frac = 0.528
[Wed Sep  5 16:35:07 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.19"
[Wed Sep  5 18:34:57 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src7.ximg exists
[Wed Sep  5 18:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src7.csv
[Wed Sep  5 18:34:57 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Sep  5 18:34:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src7.csv
[Wed Sep  5 18:34:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 18:34:58 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Sep  5 18:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Sep  5 18:34:58 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Sep  5 18:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Sep  5 18:34:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104060101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 21:42:00 2012] Warning, spatial fit 7 centroid is now closest to src. 1
[Wed Sep  5 21:42:01 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 21:42:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 21:42:01 2012] Assessing source extent using major
[Wed Sep  5 21:42:01 2012] Source does appear to be extended
[Wed Sep  5 21:42:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 21:42:31 2012] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 21:42:31 2012] Initial guess for spatial extent in simple fitting = 12.19"
[Wed Sep  5 21:42:31 2012] source mask rpix=2.8, npix_max = 43, mask sum = 23, frac = 0.528
[Wed Sep  5 21:42:31 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.19"
[Wed Sep  5 23:11:28 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Sep  5 23:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src7.csv
[Wed Sep  5 23:11:28 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Sep  5 23:11:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src7.csv
[Wed Sep  5 23:11:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 23:11:28 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Sep  5 23:11:29 2012] fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Sep  5 23:11:29 2012] Fit fullrun_pn_xmm0104060101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Sep  6 01:31:37 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 10.557125 pixels away
[Thu Sep  6 01:31:37 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 01:31:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 01:31:37 2012] Assessing source extent using major
[Thu Sep  6 01:31:37 2012] Source does appear to be extended
[Thu Sep  6 01:31:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 01:32:07 2012] XMMSAS src. selection expression = ellipse(27035.084808, 12142.303314, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Sep  6 01:32:07 2012] Writing source region out to fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src9_src.reg
[Thu Sep  6 01:32:07 2012] Extracting stamp from image fullrun_pn_xmm0104060101_pi300-10000_cl_sm2.00.img.gz, (274, 103) - (349, 178)
[Thu Sep  6 01:32:07 2012] XMMSAS bgd. selection expression = annulus(27035.084808, 12142.303314, 1087.500000, 2175.000000, X, Y) && !ellipse(26355.997345, 12520.650299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27690.488200, 12877.797400, 454.726413, 454.726413, 0.000000, X, Y) && !ellipse(26635.521484, 12747.793365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29321.622589, 13633.767349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27962.005981, 10741.369804, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Sep  6 01:32:07 2012] Writing fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src9.gif
[Thu Sep  6 01:41:10 2012] Mean detx,y = (2857.87, -11594.79) 
[Thu Sep  6 01:41:12 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 01:41:28 2012] grppha failed
[Thu Sep  6 01:41:29 2012] Setting source spectrum file to fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src9_src.pi.gz
[Thu Sep  6 01:41:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Sep  6 02:17:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Sep  6 02:17:39 2012] rmf not generated due to insufficient counts
[Thu Sep  6 02:39:50 2012] Updating aperture counts using extracted products
[Thu Sep  6 02:39:50 2012] Error reading totcts from fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src9_src.pi.gz
[Thu Sep  6 02:39:51 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 02:39:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Sep  6 02:39:57 2012] xmm0104060101/analysis//spectral/fullrun_pn_xmm0104060101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete